-15%

UT281A True RMS AC 3000A Flexible Clamp Meters

Availability:

10 in stock


1. 2m drop proof, IP54, ETL/Intertek certified 3rd edition CE

2. Coil diameter: 0.75cm, bending length: 24.5cm for UT281A and 45.7cm for UT281C

3. Large LCD display for clear reading

4. True RMS

5. Long press INRUSH key for 2s to measure inrush current

6. Data hold, backlight, auto power off

23,400 27,640

10 in stock

Compare

1. 2m drop proof, IP54, ETL/Intertek certified 3rd edition CE

2. Coil diameter: 0.75cm, bending length: 24.5cm for UT281A and 45.7cm for UT281C

3. Large LCD display for clear reading

4. True RMS

5. Long press INRUSH key for 2s to measure inrush current

6. Data hold, backlight, auto power off

Category:
Weight 0.22 kg
Dimensions 30 × 15 × 5 cm
Basic Functions Range Basic Precision
Model UT281A
Max current measurement (AC) 0.00A ~ 3000A ±(3%+5)
Current measurement (AC) 0.00A ~ 30.00A ±(3%+5)
Current measurement (AC) 0.0A ~ 300.0A ±(3%+5)
Current measurement (AC) 0A ~ 3000A ±(3%+5)
Inrush current measurement 0.00A ~ 3000A For reference
Frequency response 45Hz~500Hz (sine wave)
Jaw size Rogowski flex coil (diameter: 8mm) Bending length: 10″ inches (24.5cm); radius: around 1.5″inches (3.8cm)
True RMS measurement
Measuring digit conversion rate times/s 3
LCD display (TN) interface Single display
Manual range
Auto power off
Buzzer
Low battery indication
Data hold
Manual backlight
Working temperature 0°C ~ 50°C
2m drop proof
Protection grade IP54
Safety certification grade CAT IV 600V
General Characteristics
Device color Red and grey
Device weight 220g
Device size 300mm × 150mm × 55mm

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UT281A True RMS AC 3000A Flexible Clamp Meters”

There are no reviews yet.

  • UT658C USB Testers

    0 out of 5
    (0)

    Features of UT658 Series USB Testers

    Certifications: CE, UKCA

    ● Type-A/C interface

    ● CE certification

    ● 10 sets of data storage

    ● Loop equivalent resistance measurement (1-480Ω)

    ● Same screen shows voltage, current, power, capacity, etc.

    ● Support fast charge protocol

    SKU: 0000
  • Mechanic Special Solder Paste XG-50 35G 183°C

    0 out of 5
    (0)

    This is solder paste for soldering small SMD components in a reflow oven or with a hot air soldering station. comes in a small container for prototyping or repairing job.This pack is the right amount of solder paste for most hobby projects. This paste is the replacement for solder wire used in Through-hole soldering, some times solder flux is referred to as solder paste.

    SKU: n/a
  • TND 500VA

    0 out of 5
    (0)

    Input Voltage=140-250
    Output Voltage=220
    Copper Wind
    Analog Display
    Under and Over Volt Indication
    Under Volt Protection
    Dual Output Socket 110/220

    SKU: n/a
  • LM100D Laser Distance Meter (Curvature Edition)

    0 out of 5
    (0)

    1. Ergonomic exterior, comfortable handling

    2. Millimeter accuracy
    3. Large, HD display
    4. Auto voice and audio indication
    5. Curvature measurement, test curve length via the roller
    6. Auto power off after 3 minutes without operation
    7. Convenient angle measurement via electronic leveling
    SKU: n/a
  • Insulation Resistance Testers UT513A

    0 out of 5
    (0)

    UT510 series is a kind of intelligent insulation tester. The device circuit design takes microcomputer technology design as the core and combines the large scale integrated circuit with digit circuit. It is equipped with strong measuring software and data processing software. It is applied to the parameter measurement of insulation resistance, voltage and low resistance. It has stable performance and simple operation. It is applicable to on-site measurement and repair of the electrical equipment and charging line. It is the ideal tool of maintaining electrical equipment. It is also used for smelting, communication, manufacture, fossil oil, national defense, electricity, chemical industry and circuit.

    SKU: n/a