1. High accuracy and reliability
2. Short circuit protection and automatic recovery function
3.Dual LED displays to show current and voltage. High-performance mobile phone repair equipment that is both affordable and easy to operate.
Parameters |
|
Rated voltage | AC220V±10% 50Hz |
Operating environment | 0~40℃ relative humidity<80% |
Storage temperature | -20~80℃ relative humidity<80% |
Dimensions of the machine body | 27*14*22cm |
Weight | 1.9KG |
Performance parameters | |
Output voltage | Adjustable continuously within 0~15V |
Output current | Adjustable continuously within 0~2A (current limitation adjustment when above 0.2A) |
Output power | 15W |
Source effect | ≤1mV |
Load effect | ≤0.33% |
Ripple noise | ≤3mVrms(5Hz ~ 1MHz)/≤3mArms |
Display accuracy | 0.1V/0.1A/1mA |
Protection mode | Over-current, short circuit, over-temperature protection |
Dissipation mode | Air cooling |
₨6,000 ₨7,013
1. High accuracy and reliability
2. Short circuit protection and automatic recovery function
3.Dual LED displays to show current and voltage. High-performance mobile phone repair equipment that is both affordable and easy to operate.
Weight | 1.9 kg |
---|---|
Dimensions | 27 × 14 × 22 cm |
Specifications | |
Model | UPO2104E |
Bandwidth | 100MHz |
Channels | 4 |
Sampling rate | 1GS/s |
Memory depth | 56Mpts (single channel) |
Waveform capture rate | 83,000wfms/s |
Time base scale (s/div) | 5ns/div~50s/div |
Input impedance | (1MΩ±2%) II (20pF±3pF) |
Vertical scale (V/div) | 1mV/div~20V/div (1MΩ) |
Waveform record | 65,000 Frames |
Trigger types | Edge, pulse width, runt, window, N-edge, delay, timeout, duration, setup/hold, slope, video, code |
Waveform operations | A+B, A-B, A×B, A/B, FFT, logic operation, advanced |
Auto measurements | Peak-Peak, Amplitude, Maximum, Minimum, Top, Bottom, Mean, Middle, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, Overshoot, Pre shoot, Frequency, Cycle, Rise Time, Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio, Delay A->B (Rising edge), Delay A->B (Falling edge), Delay B->A (Rising edge), Delay B->A (Falling edge). |
Number of measurements | Display 5 measurements at the same time |
Measurement statistics | Average, Max, Min, Standard Deviation, Number of Measurements |
Frequency counter | Hardware 6 bits counter (Channels are selectable) |
Standard interfaces | USB-Host, USB-Device, LAN, AUX (Trig Out, Pass/Fail) |
General Characteristics | |
Power | 100V~240VAC, 50Hz/60Hz |
Display | 8 inches TFT color LCD Display with WVGA (800×480) resolution |
Product color | White and grey |
Product net weight | 3.5kg |
Product size | 336mm×164mm×108mm |
Standard accessories | Probe×2/4 (1×, 10× switchable), Power cord, USB cable |
Standard individual packing | Carton box |
Standard quantity per carton | 2pcs |
Standard carton measurement | 450mm×420mm×280mm |
Standard carton gross weight | 9.7kg |
MF47E series of meters is were based on the original MF47 meter.
Then it developed multi-functional, multi-purpose and multi-protection series products.
For the characteristics of various types of users, it combinated the function of the optimal to facilitate the use of users and improved its cost-effective.
It was Engaged in computer
1.High-power heater, tweezers parallel design. When need to remove the electronic components, you can use the parallel tweezers to heating the components and weld joints. It is easily and quickly to removed element without prejudice to the case of peripheral devices. It is used for different weld joints de-soldering ,more suitable for large joints, especially for factory batch job, one time can weld two points, it’s high efficiency.
2.Programmable temperature control, PID technology, the most high-precision PID implant procedures, tracking and detection of high-speed machine tweezers actual temperature and corrected. Magic temperature compensation speed so that the temperature error is small, temperature stability and temperature compensation is much faster than the same type of product.
3. To meet the market needs of different regions, the addition of Fahrenheit / Celsius temperature conversion function, the user can choose according to customary interest.
4.10 minutes fixed sleep function, up to 10 minutes without the use of iron, automatically enter sleep mode, energy and prolong tip life.
5.Parallel electric tweezers design, very convenient for small electronic components,chip, chip removal and installation of welded components. When you need to remove the parallel electric tweezers can be used directly on the welding points across the resistor components for heating.
Specifications | LM571LD-I |
Display type | Green |
Laser type | 1V1H |
Expanded Angle | H130°/V150° |
Laser class | Class 2 |
Light source | 10mW |
Laser wavelength | 510nm |
H/V accuracy | ±2mm/10m |
Self-leveling range | 3°±1° |
Self-leveling time | 3s |
Working distance (Line) | 20m; >30m with detector |
Operating time | >12h (All lasers on) |
Tripod mounting hole | √ |
There are no reviews yet.