-
×
UT50B Modern Digital Multimeters
- Vendor:
superworld
Subtotal: ₨3,300
-12%
Multimeters
CMM-40 Industrial Multimeter
Availability:
5 in stock
The most important features of CMM-40 are:
- autoranging/manual range selection,
- „DATA HOLD” function, for holding measured values,
- „REL” function, which allows you to make measurements relative to a stored reference value,
- „MAX/MIN” function,
- „PEAK HOLD” function,
- memory for 2000 measurement resultS,
- continuity test with acoustic signalling (beeper),
- „AUTO-OFF” function,
- display 4¾ digits (40000 max),
- double molded, waterproof casing.
₨30,270 ₨34,221
5 in stock
CompareIndustrial multimeter CMM-40 was designed for the purpose of measurements of AC/DC voltage, AC/DC current, resistance, capacitance, frequency (electrical and electronic), duty cycle, temperature and also for testing diodes and continuity.
| Weight | 0.4 kg |
|---|---|
| Dimensions | 19 × 8 × 5 cm |
Frequency measurement (electronic)
| Range | Resolution | Accuracy |
| 40,000 Hz | 0,001 Hz | ±(0,1% m.v. + 1 digit) |
| 400,00 Hz | 0,01 Hz | |
| 4,0000 kHz | 0,0001 kHz | |
| 40,000 kHz | 0,001 kHz | |
| 400,00 kHz | 0,01 kHz | |
| 4,0000 MHz | 0,0001 MHz | |
| 40,000 MHz | 0,001 MHz | |
| 100,00 MHz | 0,01 MHz | not speccified |
- Sensitivity: 0.8 V rms min. @ 20% to 80% duty cycle and <100 kHz; 5 V rms min @ 20% to 80% duty cycle and > 100 kHz
Frequency measurement (electrical)
| Range | Resolution | Accuracy |
| 40,00 Hz…10,000 kHz | 0,01 Hz…0,001 kHz | ± 0,5% m.v. |
- sensitivity: 1 V rms
Duty cycle measurement
| Range | Resolution | Accuracy |
| 0,10…99,00% | 0,01% | ±(1,2% m.v. + 2 digits) |
- pulse width: 100μs – 100 ms,
- frequency width: 5 Hz…150 kHz.
Temperature measurement
| Range | Resolution | Accuracy |
| -50,0°C…+1200,0°C | 0,1°C | ±(1% m.v. + 2,5°C) |
| -58,0°F…+2192,0°F | 0,1°F | ±(1% m.v. + 4,5°F) |
DC voltage measurement
| Range | Resolution | Accuracy |
| 400,0 mV | 0,01 mV | ±(0,06% m.v. + 4 digits) |
| 4,0000 V | 0,0001 V | |
| 40,000 V | 0,001 V | |
| 400,00 V | 0,01 V | |
| 1000,0 V | 0,1 V | ±(0,1% w.m. + 5 cyfr) |
AC voltage measurement (True RMS)
| Range | Resolution | Accuracy |
| 400,00 mV | 0,01 mV | ±(1% m.v. + 40 digits) |
| 4,0000 V | 0,0001 V | ±(1% m.v. + 30 digits) |
| 40,000 V | 0,001 V | |
| 400,00 V | 0,01 V | |
| 1000,0 V | 0,1 V |
- frequency range: 50…1000 Hz.
AC/DC current measurement (True RMS)
| Range | Resolution | Accuracy |
| 400,00 μA | 0,01 μA | dla DC ±(1,0% m.v. + 3 digits)
dla AC ±(1,5% m.v. + 30 digits) |
| 4 000,0 μA | 0,1 μA | |
| 40,000 mA | 0,001 mA | |
| 400,00 mA | 0,01 mA | |
| 10,000 A | 0,001 A |
- 20 A: 30 sec max with reduced accuracy.
Resistance measurement
| Range | Resolution | Accuracy |
| 400,00 Ω | 0,01 Ω | ±(0,3% m.v. + 9 digits) |
| 4,0000 kΩ | 0,0001 kΩ | ±(0,3% m.v. + 4 digits) |
| 40,000 kΩ | 0,001 kΩ | |
| 400,00 kΩ | 0,01 kΩ | |
| 4,0000 MΩ | 0,0001 MΩ | |
| 40,000 MΩ | 0,001 MΩ | ±(2,0% m.v. + 10 digits) |
Capacitance measurement
| Range | Resolution | Accuracy |
| 40,000 nF | 0,001 nF | ±(3,5% m.v. + 40 digits) |
| 400,00 nF | 0,01 nF | |
| 4,0000 μF | 0,0001 μF | ±(3,5% m.v. + 10 digits) |
| 40,000 μF | 0,001 μF | |
| 400,00 μF | 0,01 μF | |
| 4000,0 μF | 0,1 μF | ±(5% m.v. + 10 digits) |
| 40,000 mF | 0,001 mF |
Other technical data:
- power supply: 9 V battery type 6LR61
- diode test: I=0,9 mA, U0 = 2,8 V DC
- continuity test: I<0,35 mA, sound signal for R<35 Ω
- over range indication: 0L displayed
- crest factor: ≤ 3 at full scale up to 500 V; decreasing linearly to ≤ 1,5 at 1000 V
- PEAK: captures peaks >1 ms
- sampling rate: 2 times per second
- input impedance: 10 MΩ (V DC), 9 MΩ (V AC)
- display: 40000 counts backlit LCD with bargraph, 4¾ digits
- store capacitance: 2000
- dimensions: 187 x 81 x 55 mm
- weight: 342 g
- fuses: mA, µA range: 0,5 A/1000 V ceramic fast blow; A range: 10 A/1000 V ceramic fast blow
- auto power OFF: 15 min.
- accordance with following standards: EN 61010 – 1:2004, EN 61010 – 2 – 032
Electric security:
- type of insulation: double, according to EN 61010 – 1 and IEC 61557
- measurement category: CAT III 1000 V acc. to EN 61010 – 1:2004
- protection class acc. to EN 60529: IP67
Rated operational conditions:
- operating temperature: 0…+40°C
- storage temperature: -20…+60°C
- operating humidity: max 80% up to 87°F (31°C); decreasing linearly to 50% at 104°F (40°C)
- operating altitude: max 2000 m
„m.v.”- measured value
Brand
SONEL
Based on 0 reviews
Be the first to review “CMM-40 Industrial Multimeter”
-
Process Celibrators
UT715 Multifunction Loop Process Calibrator
Features of UT715 Multifunction Loop Process Calibrator
Certifications: CE, UKCA
● Step/ramp functions
● Source and measure accuracy up to 0.02%● Rechargeable battery● Contrast adjustment● Auto power off (Time adjustable)● Stores and recalls setups● USB communication● Provides 24V loop power to transmitter while conducting mA current measurement at the same timeSKU: n/a -
Clamp Meters
Titan Digital Clamp Meter Multimeter Ampere Meter
3 1/2 digits LCD with a Max. Reading of 1999
2) Diode and Buzzer function
3) Low battery indication
4) Overload protection
5) Data hold for easy reading
* Specification:
1) DC voltage: 600V (?1.0%)
2) AC voltage: 450V ( ?1.2% )
3) OHM: 200K? (?1.0%)
4) ACA: 20-400A (?2.0%)
5) Power supply: (AAA) 1.5V?2
6) Data hold: YES
7) Dimension 150L?63W?27.5Hmm
Weight 121g
SKU: n/a -
Analog Multimeters
ANALOG METER YX 360TR BS
Features Of Handheld YX-360TRE-B Analog Meter Voltmeter:
- High accuracy analogue multimeter for general purposes.
- Mirrored needle indicator with an accurate reading.
- Check both AC and DC parameters with continuity buzzer on Ohms.
- Up to 1000V on both AC and DC Voltage.
- 19 versatile ranges for general-purpose testing.
- Fuse & Diode protection.
- Compact sizing.
- Tilt back-stand.
- The large and mirrored scale of 80mm length.
SKU: n/a
There are no reviews yet.