-12%
Multimeters
CMM-40 Industrial Multimeter
Availability:
5 in stock
The most important features of CMM-40 are:
- autoranging/manual range selection,
- „DATA HOLD” function, for holding measured values,
- „REL” function, which allows you to make measurements relative to a stored reference value,
- „MAX/MIN” function,
- „PEAK HOLD” function,
- memory for 2000 measurement resultS,
- continuity test with acoustic signalling (beeper),
- „AUTO-OFF” function,
- display 4¾ digits (40000 max),
- double molded, waterproof casing.
₨30,270 ₨34,221
5 in stock
CompareIndustrial multimeter CMM-40 was designed for the purpose of measurements of AC/DC voltage, AC/DC current, resistance, capacitance, frequency (electrical and electronic), duty cycle, temperature and also for testing diodes and continuity.
| Weight | 0.4 kg |
|---|---|
| Dimensions | 19 × 8 × 5 cm |
Frequency measurement (electronic)
| Range | Resolution | Accuracy |
| 40,000 Hz | 0,001 Hz | ±(0,1% m.v. + 1 digit) |
| 400,00 Hz | 0,01 Hz | |
| 4,0000 kHz | 0,0001 kHz | |
| 40,000 kHz | 0,001 kHz | |
| 400,00 kHz | 0,01 kHz | |
| 4,0000 MHz | 0,0001 MHz | |
| 40,000 MHz | 0,001 MHz | |
| 100,00 MHz | 0,01 MHz | not speccified |
- Sensitivity: 0.8 V rms min. @ 20% to 80% duty cycle and <100 kHz; 5 V rms min @ 20% to 80% duty cycle and > 100 kHz
Frequency measurement (electrical)
| Range | Resolution | Accuracy |
| 40,00 Hz…10,000 kHz | 0,01 Hz…0,001 kHz | ± 0,5% m.v. |
- sensitivity: 1 V rms
Duty cycle measurement
| Range | Resolution | Accuracy |
| 0,10…99,00% | 0,01% | ±(1,2% m.v. + 2 digits) |
- pulse width: 100μs – 100 ms,
- frequency width: 5 Hz…150 kHz.
Temperature measurement
| Range | Resolution | Accuracy |
| -50,0°C…+1200,0°C | 0,1°C | ±(1% m.v. + 2,5°C) |
| -58,0°F…+2192,0°F | 0,1°F | ±(1% m.v. + 4,5°F) |
DC voltage measurement
| Range | Resolution | Accuracy |
| 400,0 mV | 0,01 mV | ±(0,06% m.v. + 4 digits) |
| 4,0000 V | 0,0001 V | |
| 40,000 V | 0,001 V | |
| 400,00 V | 0,01 V | |
| 1000,0 V | 0,1 V | ±(0,1% w.m. + 5 cyfr) |
AC voltage measurement (True RMS)
| Range | Resolution | Accuracy |
| 400,00 mV | 0,01 mV | ±(1% m.v. + 40 digits) |
| 4,0000 V | 0,0001 V | ±(1% m.v. + 30 digits) |
| 40,000 V | 0,001 V | |
| 400,00 V | 0,01 V | |
| 1000,0 V | 0,1 V |
- frequency range: 50…1000 Hz.
AC/DC current measurement (True RMS)
| Range | Resolution | Accuracy |
| 400,00 μA | 0,01 μA | dla DC ±(1,0% m.v. + 3 digits)
dla AC ±(1,5% m.v. + 30 digits) |
| 4 000,0 μA | 0,1 μA | |
| 40,000 mA | 0,001 mA | |
| 400,00 mA | 0,01 mA | |
| 10,000 A | 0,001 A |
- 20 A: 30 sec max with reduced accuracy.
Resistance measurement
| Range | Resolution | Accuracy |
| 400,00 Ω | 0,01 Ω | ±(0,3% m.v. + 9 digits) |
| 4,0000 kΩ | 0,0001 kΩ | ±(0,3% m.v. + 4 digits) |
| 40,000 kΩ | 0,001 kΩ | |
| 400,00 kΩ | 0,01 kΩ | |
| 4,0000 MΩ | 0,0001 MΩ | |
| 40,000 MΩ | 0,001 MΩ | ±(2,0% m.v. + 10 digits) |
Capacitance measurement
| Range | Resolution | Accuracy |
| 40,000 nF | 0,001 nF | ±(3,5% m.v. + 40 digits) |
| 400,00 nF | 0,01 nF | |
| 4,0000 μF | 0,0001 μF | ±(3,5% m.v. + 10 digits) |
| 40,000 μF | 0,001 μF | |
| 400,00 μF | 0,01 μF | |
| 4000,0 μF | 0,1 μF | ±(5% m.v. + 10 digits) |
| 40,000 mF | 0,001 mF |
Other technical data:
- power supply: 9 V battery type 6LR61
- diode test: I=0,9 mA, U0 = 2,8 V DC
- continuity test: I<0,35 mA, sound signal for R<35 Ω
- over range indication: 0L displayed
- crest factor: ≤ 3 at full scale up to 500 V; decreasing linearly to ≤ 1,5 at 1000 V
- PEAK: captures peaks >1 ms
- sampling rate: 2 times per second
- input impedance: 10 MΩ (V DC), 9 MΩ (V AC)
- display: 40000 counts backlit LCD with bargraph, 4¾ digits
- store capacitance: 2000
- dimensions: 187 x 81 x 55 mm
- weight: 342 g
- fuses: mA, µA range: 0,5 A/1000 V ceramic fast blow; A range: 10 A/1000 V ceramic fast blow
- auto power OFF: 15 min.
- accordance with following standards: EN 61010 – 1:2004, EN 61010 – 2 – 032
Electric security:
- type of insulation: double, according to EN 61010 – 1 and IEC 61557
- measurement category: CAT III 1000 V acc. to EN 61010 – 1:2004
- protection class acc. to EN 60529: IP67
Rated operational conditions:
- operating temperature: 0…+40°C
- storage temperature: -20…+60°C
- operating humidity: max 80% up to 87°F (31°C); decreasing linearly to 50% at 104°F (40°C)
- operating altitude: max 2000 m
„m.v.”- measured value
Brand
SONEL
Based on 0 reviews
Be the first to review “CMM-40 Industrial Multimeter”
-
Multimeters
UT533 Insulation Multimeter
Features of UT533 Insulation Multimeter
Certifications: CE, RoHS
● AC/DC voltage measurement
● AC/DC current measurement● Insulation resistance measurement● Resistance & Capacity test● Frequency & Temperature test
● 1000V output voltage● Double insulation designSKU: n/a -
Soldering Iron
YH 907F IRON FOR 898BD+
- This 907F handle (5-pin) is ONLY for genuine YIHUA 939D+ soldering stations. (To avoid incompatibility issue, please correctly identify the model number & pin number from your machine. )
- Note：this 907F soldering iron handle is not compatible with other stations except the genuine YIHUA 939D+ soldering station.
- 1 Year (USA Exclusive) – Our team is providing professional assistance 24/7 right on Amazon.Welcome to drop us a message at Amazon’s Messaging System if you have any queries with this spare part. We will help confirm the compatibility and recommend you the safest match part.
SKU: n/a
Related products
-
-
Multimeters
UT890D Digital Multimeter
Product Features 1. 6000 Counts 2. True RMS voltage and current measurements 3. Capacitance, Resistance, Buzzer, Diode 4. Capacitance with REL function, resolution is 1pF, maximum measurement range is 6000μF 5. Highly accurate frequency measurement function; minimum resolution is 0.001Hz 6. MAX\MIN and MAX-MIN value 7. DC current minimum resolution is 0.01 A, AC current minimum resolution is 1μA, maximum range is 20A 8. HOLD function,backlight and auto power off function
SKU: n/a
There are no reviews yet.