-
×
SOLDERING IRON KW 30WATT
- Vendor:
superworld
Subtotal: ₨450
-25%
Clamp Meters
CMP-400 Digital Clamp-On Multimeter
Availability:
5 in stock
Additionally:
- safe, insulated measuring clamps,
- double molded housing,
- autoranging/manual range selection,
- DATA HOLD function, for holding measured values,
- backlit LCD,
- REL function,
- over range indication,
- AUTO-OFF function.
₨11,844 ₨15,794
5 in stock
CompareDC current measurement (CMP-401 only) and AC current.
AC/DC voltage measurement up to 600 V.
Resistance measurement and continuity test:
Resistance measurement and continuity test:
- continuity test with acoustic signalling (beeper) for resistance below 50.
Temperature measurement (Fahrenheit and Celsius units).
Frequency measurement.
Diode test.
| Weight | 0.2 kg |
|---|---|
| Dimensions | 20 × 7 × 4 cm |
Temperature measurement
| Range | Accuracy |
|---|---|
| -20,0…760°C | ±(3% m.v. + 5°C) |
| -4,0…1400°F | ±(3% m.v. + 9°F) |
*probe (K type) accuracy not included
Frequency measurement
| Range | Accuracy |
|---|---|
| -10 Hz | ±(1,5% m.v. + 2 dgt) |
- sensitivity: 100 V (<50 Hz), 50 V (50…400 Hz); 15 V (401 Hz…10 kHz)
AC current measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 4,000 A | 0,001 A | ±(2,5% m.v. + 12 dgt) |
| 40,00 A | 0,01 A | ±(2,5% m.v. + 8 dgt) |
| 400,0 A | 0,1 A | ±(2,8% m.v. + 8 dgt) |
- frequency range: 50…60 Hz.
AC voltage measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 400,0 mV | 0,1 mV | ±(1,5% m.v. + 30 dgt) |
| 4,000 V | 0,001 V | ±(1,8% m.v. + 8 dgt) |
| 40,00 V | 0,01 V | ±(1,8% m.v. + 8 dgt) |
| 400,0 V | 0,1 V | ±(1,8% m.v. + 8 dgt) |
| 600 V | 1 V | ±(2,5% m.v. + 8 dgt) |
- frequency range: 50 Hz…400 Hz
DC voltage measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 400,0 mV | 0,1 mV | ±(0,8% m.v. + 2 dgt) |
| 4,000 V | 0,001 V | ±(1,5% m.v. + 2 dgt) |
| 40,00 V | 0,01 V | ±(1,5% m.v. + 2 dgt) |
| 400,0 V | 0,1 V | ±(1,5% m.v. + 2 dgt) |
| 600 V | 1 V | ±(2% m.v. + 2 dgt) |
Resistance measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 400,0 Ω | 0,1 Ω | ±(1,0% m.v + 4 dgt) |
| 4,000 kΩ | 0,001 kΩ | ±(1,5% m.v. + 2 dgt) |
| 40,00 kΩ | 0,01 kΩ | ±(1,5% m.v. + 2 dgt) |
| 400,0 kΩ | 0,1 kΩ | ±(1,5% m.v. + 2 dgt) |
| 4,000 MΩ | 0,001 MΩ | ±(2,5% m.v. + 3 dgt) |
| 40,00 MΩ | 0,01 MΩ | ±(3,5% m.v. + 5 dgt) |
„m.v.”- measured value
Electric security:
– measurement category: CAT III 600 V acc. to EN 61010 – 1:2004
– protection class acc. to EN 60529: IP40
Other technical data:
– power supply: 9 V battery type 6LR61
– display: 4000 counts, backlit LCD
– continuity test: I<0,5 mA, sound signal for R<50 Ω
– diode test: I = 0,3 mA, U0 = 1,5 V DC
– over range indication: 0L displayed
– sampling rate: 2 times per second
– input impedance: 10 MΩ (V DC and V AC)
– clamp size: opening 30 mm (1,2”)
– auto power OFF: approx. 30 min.
– dimensions: 197 x 70 x 40 mm
– weight: 183 g
– accordance with following standards: EN 61010 – 1:2004, EN 61010 – 2 – 032
– quality standard ISO 9001
Rated operational conditions:
– operating temperature: 0…+40°C
– storage temperature: -20…+60°C
– operating humidity: max 80% up to 31°C
decreasing linearly to 50% at 40°C
– operating altitude: max 2000 m
Brand
SONEL
Based on 0 reviews
Be the first to review “CMP-400 Digital Clamp-On Multimeter”
-
Tool Kits
JM-TP03 Double Head Bits Set Screwdriver
Features:
- Set screwdriver
- Consists of 10 PZ2 type nut heads commonly used for electric screwdriver heads
- Equipped with a box to keep the screwdriver head with a lightweight design
- Has a very strong magnetic adhesive
- Material: Chrome vanadium
SKU: n/a -
Oscilloscopes
UPO2102CS Ultra Phosphor Oscilloscope
Features and Benefits:
1、Sample Rate up to 1GS/s；
2、Channels 2/；
3、Bandwidth 100MHz，；
4、Memory Depth 32Mpts(Standard)；
5、Waveform Capture Rate up to 30,000wfms/s；
6、With 256 level intensity grading display；
7、Up to 65,000 frames for Waveform Record ,Replay；
8、Support serial bus trigger and decoding；
9、8 inches, TFT LCD，WVGA(800*480)；
10、Interface：USB Host, USB Device, LAN, VGA, AUX OUT, 10MHz input/output.
SKU: UT21P02CSO -
Wire & Cable Testers
UT681C Cable Tester
Main Features
1. Tests Ethernet cables and telephone lines
2. Equipped with RJ45 interface for Ethernet cable and RJ11 interface for telephone line testing
3. Ethernet cables: Shielded/Unshielded test
4. Visible LED indication
5. Automatically check circuit breakage, short circuit and cross circuit
6. Can toggle between fast and slow speed test modes
7. Single key operation
8. Manual/auto power off (after 10-minute inactivity)
9. Low battery indication
10. Power supplied by 9V layer-built battery
SKU: n/a
Related products
-
Clamp Meters
UT222 2500A ACA DCA Digital Clamp Meters
UT222 are stable and safe 3 5/6 digit AC&DC digital clamp meters.It is perfectly designed with over-load protection for all ranges and the unique structure, making it a superb professional meter especially for electricians.
An ideal tool for the maintenance and troubleshooting needed in metallurgy, manufacturing, petroleum, electric power, chemical industry, etc;SKU: n/a -
Clamp Meters
UT216B 600A True RMS Digital Clamp Meters
UT216 series true RMS digital clamp meter is a new-generation practical electrotechnical measurement meter which has the features of high reliability, high safety, automatic range and handheld type, has full-range overload protection and unique appearance design, is more excellent in performance, and is an ideal tool for detection, maintenance and repair of various universities and colleges, smelting, communication, manufacturing, petroleum, national defense, electrical, power and circuit equipment.
UTD216B (main features)- 1、600A AC current measurement；
- 2、True RMS response for ACV and ACA；
- 3、99.99mF capacitance measurement；
- 4、V.F.C function for measuring signal at variable frequency ；
- 5、Non-contact voltage detection with LED indication；
- 6、Flashlight for working at dark environment.
SKU: n/a -
Clamp Meters
UT213C ACA DCA Digital Clamp Meters
Main Features
1. 10A/400A AC/DC measurement with Hall-effect sensor
2. Auto range makes measurement faster and more effective
3. 4000 display count, 3/s sampling rate
4. True RMS measurement
5. NCV, Non-Contact AC Voltage testing
6. Frequency and duty ratio measurement
7. MAX/MIN mode
8. Relative mode
9. Flashlight function for measuring at night or in the dark
10. K-type point contact temperature probe for temperature measurement
11. Large jaw of 30mm
12. Data hold
13. LCD backlight
14. Auto power off
15. 1m drop proof
16. Complies with CE (European Union) directives
SKU: n/a -
Clamp Meters
UT221 2000A ACA DCA Digital Clamp Meters
UT221 are stable and safe 3 5/6 digit AC&DC digital clamp meters.It is perfectly designed with over-load protection for all ranges and the unique structure, making it a superb professional meter especially for electricians.
An ideal tool for the maintenance and troubleshooting needed in metallurgy, manufacturing, petroleum, electric power, chemical industry, etc;SKU: n/a
There are no reviews yet.