Digital Storage Oscilloscope UTD2202CM

Availability:

5 in stock


Specifications and features:

1. 2 channels,1GS/s sample rate

2. 200MHzbandwidth, 16Mpts maximum memory depth

3. Waveformacquisition rate is up to 150,000wfms/s

4. Verticalsensitivity: 2mV/div~5V/div

5. Time-basedrange: 2ns/div~50s/div

6. Trigger modes:edge, pluse, runt, video, slope, alternate

7. Customized AUTO,fast captures the signals

9. Supports Y-T andX-Y mode at the same time, can observe Lissajous waveform

10. 34 kinds ofauto measurements

11. Optional LAmodule

12. Standardinterfaces: USB Host,USBDevice,Pass/Fail

13. 7-inch TFT LCD,WVGA (800*480)

0

5 in stock

Compare

Specifications and features:

1. 2 channels,1GS/s sample rate

2. 200MHzbandwidth, 16Mpts maximum memory depth

3. Waveformacquisition rate is up to 150,000wfms/s

4. Verticalsensitivity: 2mV/div~5V/div

5. Time-basedrange: 2ns/div~50s/div

6. Trigger modes:edge, pluse, runt, video, slope, alternate

7. Customized AUTO,fast captures the signals

9. Supports Y-T andX-Y mode at the same time, can observe Lissajous waveform

10. 34 kinds ofauto measurements

11. Optional LAmodule

12. Standardinterfaces: USB Host,USBDevice,Pass/Fail

13. 7-inch TFT LCD,WVGA (800*480)

Category:
Weight 2.5 kg
Dimensions 32 × 15 × 13 cm
Model UTD2202CM
Channels 2
Bandwidth 200MHz
Sample Rate 1GS/s
Rise Time ≤1.8ns
Memory Depth 16Mpts
Waveform Acquisition Rate ≥150,000wfms/s
Vertical Sensitivity(V/div) 2mV/div~5V/div
Time-based Range(s/div) 2ns/div~50s/div
Storage Setup, Wave, Bitmap, CSV
Trigger
Trigger Frequency 6 bits
Trigger Modes Edge, Pluse, Video, Slope, Alternate
Trigger Level Range Internal Center of the Screen±div
EXT ±1.2V
EXT/5 ±6V
Suppression Range 100ns~1.5s
Edge Trigger
Edge Mode Rising, Falling, Rising and Falling
Pluse Trigger
Trigger Mode Positive pulse width(greater than, less    than or equal to); Negative pulse width(greater than, less than or equal to)
Pluse Width Range 20ns~10s
Video Trigger
Signal Mode and Line/Field Supports standard NTSC, PAL and SECAM    signal mode, lines range is 1-525(NTSC) and 1-625(PAL/SECAM)
Slope Trigger
Trigger Mode Positive slope(greater than, less than    or equal to); Negative slope(greater than, less than or equal to)
Time Setting 20ns~10s
Measurements
Cursor Manual Mode Voltage difference between the cursor(ΔV),Time difference between cursor(ΔT),reciprocal of ΔT(Hz) (1/ΔT)
Tracking Mode Voltage value and time value of wave    point
Auto Measurements Allowed to display cursor in auto    measurement
Auto Measurements Maximum, Minimum, Peak to Peak Value,    Top Value, Amplitude, Period Average, Average, Period Mean Square    Root, Mean Square Root, Acreage, Period Acreage, Overshoot,    Undershoot, Rising Edge, Falling Edge, Frequency, Period, Rising Time,    Falling Time, Pluse Width, Positive Pluse Width, Negative Pluse Width, Burst    Pluse Width, Positive Duty Ratio, Negative Duty Ratio, Phase, FRR、FRF、FFR、FFF、LRR、LRF、LFR、LFF
Mathematics Operations Add, Subtract, ,Multiply, Divide and    Reverse Phase
Storage Waveform 10 Groups of Waveforms, 10 Kinds of    Settings
FFT Window Hanning、Hamming、Blackman、Rectangular
Sample Point 1024 points
Lissajous Figures Bandwidth 60MHz/100MHz
Phase Difference ±3 degrees
Others
Interface Standard Accessories: USB Host, USB    Device, Pass/Fail; Optional: LAN, LA
General Characteristics
Power 100~240VACrms,50Hz/60Hz
LCD Size 7 inches TFT LCD       ,WVGA(800×480)
Product Color Ivory and Grey
Product Net Weight 2.9 kg
Product Size  (W×H×D) 332mm×147mm×170mm
Standard Accessories Probes×2(1:1,10:1 switchable), Power Cord,    USB Cable, PC Software CD
Standard Individual Packing Gift Box

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Digital Storage Oscilloscope UTD2202CM”

There are no reviews yet.

  • Clamp Meter DT 3266

    (1)
    • clamp multimeter
    • Performs AC/DC Voltage, AC current, Resistance, Audible Continuity, Diode
    • Temperature Measurements, and non-contact ACV Detect (NCV) as well as Capacitance, Hz, etc.
    • Auto Ranging DMM with AC current clamp meter function
    SKU: n/a
  • UT219M ACA Professional Clamp Meters with Motor Test

    0 out of 5
    (0)
    • UT-219 professional clamp meter series is three-proofing digital clamp meter specially designed for professional industrial users.
    •  The industrial design of this series is rugged and durable, and capable of withstanding the impact from 2 meters fall-down.
    • The waterproof rating is up to IP54; therefore, it can be used in environment with water splashing or much more dust. The whole series is configured with LoZ (Low Impedance Input) AC voltage tap position, which is capable of testing the false voltage; auto backlight function can be used continuously under the circumstance of emergency power outage. UT-219M is also provided with MOTOR test function, allowing to directly test the phase sequence of three phase AC motor by means of the probe. UT-219 series is much more in compliance with CAT IV 600V safety level, and certified by the German GS institution.
    SKU: n/a
  • YH 816D IRON

    0 out of 5
    (0)
    SKU: n/a
  • UT372D 2-in-1 Tachometer

    0 out of 5
    (0)

    UT372D 2-in-1 Tachometer is a reliable and safe tachometer, which combines contact and non-contact measurement modes. It is mainly used to measure Revolutions Per Minute(RPM) , frequency, surface velocity and length in the fields of motors, fans, automobiles, papermaking, etc.

    SKU: n/a
  • TDGC 1000VA

    0 out of 5
    (0)

    Input Voltage=220V/230V
    Output Voltage=0-250V
    Maximum Output Current=4
    Copper Wind
    LCD Output Display
    Three Pin Output Socket

    SKU: n/a