MIC-5001, 5000V Insulation Tester
5 in stock
Insulation resistance measurement in a compact, light-weight, low-cost design.
- Measurement to 5 TΩ
- Measuring voltage selectable from 50 V to 500 V range in 50 V steps, and from 500 V to 5000 V range in 100 V steps
- Continuous indication of insulation resistance or leakage current
- Automatic discharge of stored charge due to capacitance of tested object after the insulation resistance measurement
- Audio beeps every five seconds to alert user test is proceeding, and to get time characteristics
- Measured test times of T1, T2 and T3 for measuring Absorption Coefficient, Dielectric Absorption Ratio DAR. and Polarization Index PI
- Continuous display of test voltage during the measurement
- Protection against measuring live objects
- Two and three-lead measurement method
- Ramp Test Insulation resistance measurement
- Measurement of breakdown voltage with increments up to 1 kV / s
- Measurement of alternating and direct voltages from 0 V to 750 V
- 990 cells of memory (11880 records) to record results
- Data transfer to PC via USB cable
- Built-in rechargeable battery pack
- Meets the requirements of the EN 61557 standard
- Charge from optional car lighter (12 V) socket accessory
₨0
5 in stock
CompareInsulation Resistance Meter
| Weight | 1 kg |
|---|---|
| Dimensions | 20 × 18 × 8 cm |
Insulation resistance measurement (two-lead)
Measurement range acc. to IEC 61557- 2 for RISOmin=VISOnom/IISOmax…5 TΩ (IISOmax=1 mA)
| Range | Resolution | Accuracy |
|---|---|---|
| 0.0 to 999.9 kΩ | 0.1 kΩ | ±(3% m.v. + 20 digits) |
| 1.000 to 9.999 MΩ | 0.001 MΩ | ±(3% m.v. + 20 digits) |
| 10.00 to 99.99 MΩ | 0.01 MΩ | ±(3% m.v. + 20 digits) |
| 100.0 to 999.9 MΩ | 0.1 MΩ | ±(3% m.v. + 20 digits) |
| 1.000 to 9.999 GΩ | 0.001 GΩ | ±(3% m.v. + 20 digits) |
| 10.00 to 99.99 GΩ | 0.01 GΩ | ±(3% m.v. + 20 digits) |
| 100.0 to 999.9 GΩ | 0.1 GΩ | ±(3% m.v. + 20 digits) |
| 1.000 to 5.000 TΩ | 1 GΩ | ±(4% m.v. + 50 digits) |
Values of measured resistance depending on measurement voltage
| Voltage VISO | Measurement range |
|---|---|
| up to 100 V | 50 GΩ |
| 200 to 400 V | 100 GΩ |
| 500 to 900 V | 250 GΩ |
| 1000 to 2400 V | 500 GΩ |
| 2500 V | 2500 GΩ |
| 5000 V | 5 TΩ |
RampTest Insulation resistance measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 0.0 to 999.9 kΩ | 0.1 kΩ | ±(5% m.v. + 40 digits) |
| 1.000 to 9.999 MΩ | 0.001 MΩ | ±(5% m.v. + 40 digits) |
| 10.00 to 99.99 MΩ | 0.01 MΩ | ±(5% m.v. + 40 digits) |
| 100.0 to 999.9 MΩ | 0.1 MΩ | ±(5% m.v. + 40 digits) |
| 1.000 to 9.999 GΩ | 0.001 GΩ | ±(5% m.v. + 40 digits) |
| 10.00 to 99.99 GΩ | 0.01 GΩ | ±(5% m.v. + 40 digits) |
| 100.0 to 999.9 GΩ | 0.1 GΩ | ±(5% m.v. + 40 digits) |
| 1.000 to 4.999 TΩ | 0.001 TΩ | ±(5% m.v. + 40 digits) |
The measurement of breakdown voltage in RampTest mode
| Range | Resolution | Chosen UISO | Accuracy |
|---|---|---|---|
| 25.0 V to 99.0 V | 0.1 V | <600 V | ± 5% m.v. ± 10 digits |
| 100 V to 600 V | 1 V | <600 V | ± 5% m.v. ± 4 digits |
| 25 V to 999 V | 1 V | >600 V | ± 5% m.v. ± 5 digits |
| 1.00 kV to 5.00 kV | 10V | >600 V | ± 5% m.v. ± 4 digits |
DC and AC voltage measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 0 to 299.9 V | 0.1 V | ±(3% m.v. + 2 digits) |
| 300 to 750 V | 1 V | ±(3% m.v. + 2 digits) |
- frequency range: 45 to 65 Hz
VISO – measurement voltage
The acronym “m.v.” stands for a “measured reference value”
Electrical safety:
- type of insulation double, in acc. with EN 61010-1 and IEC 61557
- measurement category III 600 V (IV 300 V) in acc. EN 61010-1
- case protection rating in acc. EN 60529 IP6529: IP65
Other technical specifications::
- power supply of the meter NiMH 9.6 V – 2 Ah battery pack and power supply 12 V
- weight of the meter approx. 0.9 kg, 2 lbs
- dimensions 200 x 180 x 77 mm, 7.9 x 7 x 3 ins
- LCD segment display
- memory for measurement results: 990 cells, 11880 records
- transfer of measurement results data via USB
Brand
SONEL
Based on 0 reviews
Be the first to review “MIC-5001, 5000V Insulation Tester”
-
Tachometers
UT 371Series Tachometers
Features of UT371 Series Tachometers
Certificates: CE, UKCA
● 5 digits LCD screen, RPM/count and time dual display
● MAX/MIN/AVG/normal modes
● Adjustable sampling rate (0.5-255s)
● Auto power off (cancelable)● Optional (on/off) laser pointer
● Clock and time setting
● Data hold, low power consumption, continuous work for 40hrsSKU: n/a -
LCR Meter
UT612 LCR Meters
UT610 series is a handheld LCR digitalelectric bridge meter with stable performance, safety, reliability and autorange. It is professional to measure inductance, capacitance and resistance. Ithas the features of low power dissipation, high accuracy and fast speed. It canselect the series-parallel measurement mode; measure the quality factor ofcomponents, the loss, the phase angle, equivalent resistance and DC resistance.It can provide up to 5 kinds of frequency under the inductance, capacitance andresistance mode to satisfy the actual requirement.
It is applicable to measuring and filtratingthe inductance, capacitance and resistance of lab, production line, maintenancepoint and teaching. It is the ideal tool of maintaining for many users.
SKU: n/a -
Wire & Cable Testers
UT681L Cable Tester
Main Features
1. Tests Ethernet cables and telephone lines
2. Equipped with RJ45 interface for Ethernet cable and RJ11 interface for telephone line testing
3. Ethernet cables: Shielded/Unshielded test
4. Visible LED indication
5. Automatically check circuit breakage, short circuit and cross circuit
6. Can toggle between fast and slow speed test modes
7. Single key operation
8. Manual/auto power off (after 10-minute inactivity)
9. Low battery indication
10. Power supplied by 9V layer-built battery
SKU: n/a -
Soldering Station
YH 937D SOLDERING STATION
Features Of Adjustable Temperature Digital Soldering Rework Station YH937D:
- Extremely low noise
- ESD design of soldering iron to protect sensitive components
- LED display to show precision real temperature
- Ventilations on the sides for heat radiation
- Quick warm-up and stabilized temperature
- Agile and light handle suitable for comfortable long time use
- Plastic Stand for keeping the iron from flammable materials
- Dampened sponge to wipe the soldering tips at times
- Free 5 Tips for more convenience operation
- Lightweight and space-saving
- Suitable for mounting and reworking SMD components by hand
SKU: n/a -
Clamp Meters
UT222 2500A ACA DCA Digital Clamp Meters
UT222 are stable and safe 3 5/6 digit AC&DC digital clamp meters.It is perfectly designed with over-load protection for all ranges and the unique structure, making it a superb professional meter especially for electricians.
An ideal tool for the maintenance and troubleshooting needed in metallurgy, manufacturing, petroleum, electric power, chemical industry, etc;SKU: n/a
Related products
-
Insulation Tester
JM Z16 HEAT INSULATION MAT
JAKEMY JM-Z16 Magnetic Heat Insulation Silicone anti-static Working Mat for Soldering Assembling Electronics DIY Repair.
Feature:
Brand new and high quality.
Heat-resistant coefficient: 300 Celcius degree (hot wind) / 230 Celcius degree (direct contact).
Anti-static coefficient: 1*10E12ohm.
Units design, easy to keep track of parts.
Food grade material, non-toxic and safe in use. 6. Suitable for electronics devices repairing.Accessories:
Anti-static and heat-proof working mat*1SKU: n/a -
Insulation Tester
MIC-15k1 ,15kV Insulation Quality Analyzer
Features:
- Diagnostics of insulation systems based on standard measurements of IR, DAR, PI, SV, RT, DD, widened with thepartial discharge (PD) indicator for every each of these measurements.
- It allows testing the electrical durability of the tested object – breakdown voltage indication.
- High resistance to electromagnetic interferences guarantees uninterrupted work in power stations and close to high voltage transmission lines up to 1200 kV AC and 500 kV DC.
- The function of smooth voltage rise in time (RT – Ramp Test) allows to state the partial discharges in the facility and to carry out a partial location of their occurrence.
- Efficient converter with a power of ~150 W that enables insulation burnout, allowing for pinpointing the location of cables and wires short circuit using one of the following:
- visual method (if power cables are visible along the entire length),
- reflectometric methods, seismic-acoustic waves detector, or with A-frame to indicate direction of the fault (the conductor must be buried in the ground with earth direct contact).
- Compatible with external software.
SKU: n/a -
Insulation Tester
DIGITAL INSULATION / CONTINUITY TESTER MODEL 3007A
• Bargraph to display insulation resistance.
• Displays the value of external AC voltage along with flashing symbol.
• Auto null function to automatically subtract the test lead resistance before displaying the real continuity resistance value.
• Trac-Lok mode to conserve battery life on insulation and continuity tests.
• Live circuit warning beeper.
• Releasing the test button automatically discharges the charges stored in the circuit under test.
• Backlight function to view the test results in dimly lit areas.
• 200mA continuity measuring current to IEC 61557.
• Minimum 1mA current on insulation tests to IEC 61557.SKU: n/a -
There are no reviews yet.