UT139S True RMS Digital Multimeter
10 in stock
₨13,800 ₨16,350
10 in stock
CompareWeight | 0.3 kg |
---|---|
Dimensions | 17 × 8 × 5 cm |
Specifications | Range | UT139S | |||
DC voltage (V) | 600V | ±(0.5%+2) | |||
AC voltage (V) | 600V | ±(0.8%+3) | |||
DC current (A) | 10A | ±(0.7%+2) | |||
AC current (A) | 10A | ±(1%+3) | |||
Resistance (Ω) | 60MΩ | ±(0.8%+2) | |||
Capacitance (F) | 99.99mF | ±(4%+5) | |||
Frequency (Hz) | 10Hz~10MHz | ±(0.1%+4) | |||
Temperature (°C) | -40°C~1000°C | ±(1%+4) | |||
Temperature (°F) | -40°F~1832°F | ±(1.5%+5) | |||
Features | |||||
Display count | 6000 | ||||
Auto range/Manual range/True RMS | √ | ||||
Bandwidth (Hz) | 45Hz~400Hz | ||||
NCV/Continuity buzzer | √ | ||||
Duty cycle | 0.1%~99.9% | √ | |||
Diode | Around 3V | ||||
LPF/LoZ (ACV) | √ | ||||
Analog bar | √ | ||||
General Characteristics | |||||
Power | 1.5V battery (R6) x 2 | ||||
Display | 58mm x 36mm | ||||
Product color | Red and grey | ||||
Product net weight | 345g | ||||
Product size | 170mm x 80mm x 48mm | ||||
Standard accessories | Batteries, test leads, temperature probe | ||||
. | |||||
Based on 0 reviews
Be the first to review “UT139S True RMS Digital Multimeter”
-
Wire & Cable Testers
UT681L Cable Tester
Main Features
1. Tests Ethernet cables and telephone lines
2. Equipped with RJ45 interface for Ethernet cable and RJ11 interface for telephone line testing
3. Ethernet cables: Shielded/Unshielded test
4. Visible LED indication
5. Automatically check circuit breakage, short circuit and cross circuit
6. Can toggle between fast and slow speed test modes
7. Single key operation
8. Manual/auto power off (after 10-minute inactivity)
9. Low battery indication
10. Power supplied by 9V layer-built battery
SKU: n/a -
Oscilloscopes
Digital Storage Oscilloscope UTD2202CM
Specifications and features:
1. 2 channels,1GS/s sample rate
2. 200MHzbandwidth, 16Mpts maximum memory depth
3. Waveformacquisition rate is up to 150,000wfms/s
4. Verticalsensitivity: 2mV/div~5V/div
5. Time-basedrange: 2ns/div~50s/div
6. Trigger modes:edge, pluse, runt, video, slope, alternate
7. Customized AUTO,fast captures the signals
9. Supports Y-T andX-Y mode at the same time, can observe Lissajous waveform
10. 34 kinds ofauto measurements
11. Optional LAmodule
12. Standardinterfaces: USB Host,USBDevice,Pass/Fail
13. 7-inch TFT LCD,WVGA (800*480)
SKU: n/a -
Insulation Tester
MIC-15k1 ,15kV Insulation Quality Analyzer
Features:
- Diagnostics of insulation systems based on standard measurements of IR, DAR, PI, SV, RT, DD, widened with thepartial discharge (PD) indicator for every each of these measurements.
- It allows testing the electrical durability of the tested object – breakdown voltage indication.
- High resistance to electromagnetic interferences guarantees uninterrupted work in power stations and close to high voltage transmission lines up to 1200 kV AC and 500 kV DC.
- The function of smooth voltage rise in time (RT – Ramp Test) allows to state the partial discharges in the facility and to carry out a partial location of their occurrence.
- Efficient converter with a power of ~150 W that enables insulation burnout, allowing for pinpointing the location of cables and wires short circuit using one of the following:
- visual method (if power cables are visible along the entire length),
- reflectometric methods, seismic-acoustic waves detector, or with A-frame to indicate direction of the fault (the conductor must be buried in the ground with earth direct contact).
- Compatible with external software.
SKU: n/a
There are no reviews yet.