-8%

UT60A Modern Digital Multimeters

Availability:

Out of stock


Product Features

1. Analogue bar graph

2. Diode test and buzzer continuity

3. Transistor measurement

4. Auto range

5. MAX/MIN/REL measurement mode

5,842 6,318

Out of stock

Compare

Product Features

1. Analogue bar graph

2. Diode test and buzzer continuity

3. Transistor measurement

4. Auto range

5. MAX/MIN/REL measurement mode

SKU: 60AA075 Category:
Specifications Range Best Accuracy
Model UT60A
DC Voltage (V) 400mV/4V/40V/400V/1000V ±(0.8%+1)
AC Voltage (V) 4V/40V/400V/750V ±(1%+5)
Communication bandwidth 40Hz~400Hz
DC Current (A) 400mA/4000mA/40mA/400mA/4A/10A ±(1%+2)
AC Current (A) 400mA/4000mA/40mA/400mA/4A/10A ±(1.5%+5)
Resistance (Ω) 400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ ±(1%+2)
Capacitance (F) 40nF/400nF/4μF/40μF/100μF ±(3%+5)
Frequency (Hz) 10Hz~9MHz ±(0.1%+3)
Duty Cycle 0.1%~99.9%
Features
Fused 10A Range Ceramic fuse
Relative Mode
Full Icon Display
Diode
Continuity Buzzer
Low Battery Display
Input Impedance for DC Voltage Measurement 10MΩ
Data Hold
Auto Ranging
Auto/Manual Range
Display Backlight
Max Display 3999
Auto Power Off
General Characteristic 
Power 9V Battery (6F22)
LCD Size 63mm×31mm
Product Colour Red and Grey
Product Net Weight 340g
Product Size 177mm×85mm×40mm
Standard Accessories Test Lead, Battery,Test Clip, RS232C Interface Cable,PC Software CD
Standard Individual Packing Gift Box, English Manual
Standard Quantity Per Carton 40Pcs
Standard Carton Measurement 595mm x 400mm x 326mm (0.078 CBM Per Standard Carton)
Standard Carton Gross Weight 21Kg
Optional Accessories* Clip-On Test Lead Light (UT-TL), Built-In Test Lead Light (UT-L1), Built-In Test Lead Light Plus (UT-L2)

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UT60A Modern Digital Multimeters”

There are no reviews yet.

  • MC TIP 900M TI

    0 out of 5
    (0)
    SKU: n/a
  • SOLDERING IRON ON/OFF 60W

    0 out of 5
    (0)

    caution;

    our real products may be differ from the given images

    SKU: n/a
  • A25F PM2.5 Meter

    0 out of 5
    (0)

    1. Precise PM2.5 concentration based on pre-calibrated sensors

    2. Temperature measurement (°C/°F)
    3. Humidity measurement
    4. Emoticon display
    5. LCD backlight and red backlight alarm
    6. Battery status, low power, auto power off
    7. Formaldehyde concentration
    SKU: n/a
  • TDR-420 Time Domain Reflectometer/ Cable Fault Locator

    0 out of 5
    (0)

    Product features

    • Possibility damage-free location of impedance changes of tested cables and wires such as:
      • shorted conductor,
      • open conductor / end of cable – useful during the inventory of warehouses and stores,
      • splice,
      • splitter,
      • water ingress,
      • wet splice,
      • bridge tap
      • or other changes.
    • Single measurement mode ONCE,
    • Continuously measurement mode CONT,
    • Tone signal generator TONE,
    • Two cursors to mark two places of damage along with an indication of the distance between them,
    • Built-in HELP function for easier interpretation of the reflectogram,
    • 11 available measuring ranges from 7 m to 6000 m,
    • „dead zone” limited to 0.6 m,
    • Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
    • manually set of sensitivity in 8 steps GAIN,
    • output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
    • Velocity of Propagation set in range from 10% to 99%,
    • tight and durable housing with IP67 ingress protection degree.
    • Small size and weight.
    SKU: n/a
  • MRU-21 Earth Resistance Meter

    0 out of 5
    (0)

    Possible measurements:

    • earth resistance measurment with 3-pole method,
    • measurement of continuity of equipotential bondings and protective conductors with auto-zero function – with current 200 mA,
    • resistance measurement using 2-pole method.
    SKU: n/a