-10%

ET827 Handheld Tester with High Resolution Screen and Digital Multimeter Oscilloscope


27,000 30,000

Compare

ET827 Handheld Tester with High Resolution Screen and Digital Multimeter Oscilloscope

  • The automatic waveform mode, normal mode and single mode can be used for the waveform needs of different users.
  • The high-resolution screen provides clear and intuitive display and bright backlight.
  • 2 in 1 function, multimeter + oscilloscope, easy to use and quick measurement, convenient to use.
  • The oscilloscope probe is not needed and the waveform can be measured quickly and accurately.
  • The data waveform holding function in measurement can include 100 records and 50 waveforms.
Category:

Element Type: Oscilloscope Multimeter
Material: ABS

General <75% RHProduct size: approx. 160 x 82 x 30 mm/6.3 x 3.2 x 1.2 in analogue bandwidth 40 MHz Hz vertical resolution 8 bit input resistor approx. 10mQ Vertical Sensitivity Range 500mV/Div-200V/DivVertical Amplitude Accuracy ± (5% + 0.2div) Automatic 0 Reference During DC MeasurementTrigger Level ± 6div) (0.1div Position Setting ± 12div (0.1div per step) Cursor Measurement Function DT, 1/DT (Frequency) Automatic measuring accuracy ± (5% + 0.2div) Observation range 60 x 40 mm input resistance 10 MΩ automatic shut-off 15 minutes or deactivates operating altitude 0 – 2000 m memory capacity 100 DMM data, 50 OSC waveform recordings Storage condition-10 °C -60 °C. <90%. RHWeight: approx. 411g/14.5ozMaximum real-time sample rate 200MSPSNonlinearity ± 1bitIndexingVertical ± 6.0, horizontal 24.0Time Base Range12.5ns/div-10s/divTime Base Accuracy ± (0.01% + 0.1div) Scan ModeAuto/Normal/SingleTrigger Slope Selection. tionRising/Falling EdgeAuto ConfigurationAutomatic timebase and vertical amplitudeAutomatic measuring functionVp-p, Vavg, VrmsRecord Length24.0divAnalogue bandwidth up to 40 MHz refers to the bandwidth when the voltage is damped to 3 dB. If the input signal is disturbed, use a conversion plug and a special shielded high frequency wire. The vertical damping is 1-2-5 range switching

Brand

China Brand

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “ET827 Handheld Tester with High Resolution Screen and Digital Multimeter Oscilloscope”

There are no reviews yet.

  • CLAMP METER AC DC VC 903

    0 out of 5
    (0)

    Product Details

    You can get measurements for :

    AC/DC VOLTAGE,
    AC/DC CURRENT
    RESISTANCE
    CAPACITANCE
    FREQUENCY
    DUTY CYCLE
    CONTINUITY
    DIODE
    TEMPERATURE
    EXTRA FUNCTIONS:
    TRUE-RMS
    HOLD
    BACKLIGHT
    LOW BATTERY ALERT
    AUTO POWER OFF

    SKU: n/a
  • UT231 Digital Power Clamp Meters

    0 out of 5
    (0)

    UT 230 series is a handheld intelligent power clamp meter, which combines with digital current meter and power meter. It is equipped with powerful measurement and data processing software, which can help complete measurements, calculations and displays of voltage, current, active power, power factor, phase angle, apparent power, reactive power, power, frequency, temperature and other parameters.

    SKU: n/a
  • JM X4 MAGNETIC WRIST BAND

    0 out of 5
    (0)
    SKU: n/a
  • TND 1000VA

    0 out of 5
    (0)

    Input Voltage=140-250
    Output Voltage=220
    Copper Wind
    Analog Display
    Under and Over Volt Indication
    Under Volt Protection
    Dual Output Socket 110/220

    SKU: n/a
  • UT12E-US AC Voltage Detector

    0 out of 5
    (0)

    features:
    1. Auto power off
    2. Buzzer
    3. LED indication
    4. IP 67
    5. AC voltagedetection
    6. High/Lowvoltage mode
    7. Vibration mode

    Applications:
    Low voltage mode: Low-voltage motor (<90V), audio systems, arc welding machines,underground mining lighting, cables with thick insulation layer and other weakelectromagnetic AC signals.
    High voltage mode: Urban electric supply and three-phase systems (90~1000V). Forexample, power distribution units, electrical panels, electrical appliances.

    SKU: n/a