-10%

ET827 Handheld Tester with High Resolution Screen and Digital Multimeter Oscilloscope


27,000 30,000

Compare

ET827 Handheld Tester with High Resolution Screen and Digital Multimeter Oscilloscope

  • The automatic waveform mode, normal mode and single mode can be used for the waveform needs of different users.
  • The high-resolution screen provides clear and intuitive display and bright backlight.
  • 2 in 1 function, multimeter + oscilloscope, easy to use and quick measurement, convenient to use.
  • The oscilloscope probe is not needed and the waveform can be measured quickly and accurately.
  • The data waveform holding function in measurement can include 100 records and 50 waveforms.
Category:

Element Type: Oscilloscope Multimeter
Material: ABS

General <75% RHProduct size: approx. 160 x 82 x 30 mm/6.3 x 3.2 x 1.2 in analogue bandwidth 40 MHz Hz vertical resolution 8 bit input resistor approx. 10mQ Vertical Sensitivity Range 500mV/Div-200V/DivVertical Amplitude Accuracy ± (5% + 0.2div) Automatic 0 Reference During DC MeasurementTrigger Level ± 6div) (0.1div Position Setting ± 12div (0.1div per step) Cursor Measurement Function DT, 1/DT (Frequency) Automatic measuring accuracy ± (5% + 0.2div) Observation range 60 x 40 mm input resistance 10 MΩ automatic shut-off 15 minutes or deactivates operating altitude 0 – 2000 m memory capacity 100 DMM data, 50 OSC waveform recordings Storage condition-10 °C -60 °C. <90%. RHWeight: approx. 411g/14.5ozMaximum real-time sample rate 200MSPSNonlinearity ± 1bitIndexingVertical ± 6.0, horizontal 24.0Time Base Range12.5ns/div-10s/divTime Base Accuracy ± (0.01% + 0.1div) Scan ModeAuto/Normal/SingleTrigger Slope Selection. tionRising/Falling EdgeAuto ConfigurationAutomatic timebase and vertical amplitudeAutomatic measuring functionVp-p, Vavg, VrmsRecord Length24.0divAnalogue bandwidth up to 40 MHz refers to the bandwidth when the voltage is damped to 3 dB. If the input signal is disturbed, use a conversion plug and a special shielded high frequency wire. The vertical damping is 1-2-5 range switching

Brand

China Brand

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “ET827 Handheld Tester with High Resolution Screen and Digital Multimeter Oscilloscope”

There are no reviews yet.

  • UT387S Wall Scanners

    0 out of 5
    (0)

    UT387S wall scanners are used to detect a variety of objects behind the wall, designed with multiple measurement modes and additional function to conveniently measure the laser distance and wood moisture detection. They are widely used in home renovation, home improvement and DIY projects.

    SKU: n/a
  • YH Q208I PIPE FOR YH 8509,

    0 out of 5
    (0)
    SKU: n/a
  • UT120C Pocket Size Type Digital Multimeters

    0 out of 5
    (0)

    Main Features

    1. Auto range

    2. Auto polarity indication

    3. Relative mode

    4. Data hold

    5. Auto power off

    6. Capacitance measurement

    7. AC/DC current measurement

    8. Complies with CE (European Union) directives

    SKU: n/a
  • CMM-40 Industrial Multimeter

    0 out of 5
    (0)

    The most important features of CMM-40 are:

    • autoranging/manual range selection,
    • „DATA HOLD” function, for holding measured values,
    • „REL” function, which allows you to make measurements relative to a stored reference value,
    • „MAX/MIN” function,
    • „PEAK HOLD” function,
    • memory for 2000 measurement resultS,
    • continuity test with acoustic signalling (beeper),
    • „AUTO-OFF” function,
    • display 4¾ digits (40000 max),
    • double molded, waterproof casing.
    SKU: n/a
  • YH 08B TIP CLEANER

    0 out of 5
    (0)
    Note: Products with electrical plugs are designed for use in the US. Outlets and voltage differ internationally and this product may require an adapter or converter for use in your destination. Please check compatibility before purchasing.
    SKU: n/a