Analog bandwidth |
150MHz |
250MHz |
Channels |
2+16 digital |
4+16 digital |
2+16 digital |
4+ 16digital |
Sampling rate (Analog) |
2.5GS/s (Single channel), 1.25GS/s (Dual channels) |
Sampling rate (Digital) |
1.25GS/s (Eight channels), 625MS/s(Sixteen channels) |
Memory depth |
70Mpts |
Waveform capture rate |
200,000wfms/s |
Time base scale |
2ns/div~50s/div (Real-time sampling rate, memory depth display ) |
Time base scale (digital) |
2ns/div~40S/div[Step by 1-2-4 stall] |
Input impedance |
(1MΩ±1%) II (20pF±3pF) |
Input impedance digital |
(101kΩ±1%) II (9pF±1pF) |
Vertical scale |
1mV/div~20 V/div (1 MΩ) |
DC gain accuracy |
<5mV: ±3%, ≥5mV: ±2% |
Waveform record |
100,000 frames |
Trigger types |
Edge, Runt, Window, Nth Edge, Delay, Overtime, Duration, Setup/Hold, Pulse Width, Slop, Video, Code; RS232/UART, I2C, SPI, USB,
CAN, LIN, FlexRay |
Bus decode |
RS232/UART, I2C, SPI, USB, CAN, LIN, FlexRay |
Waveform operations |
A+B, A-B, A×B, A/B, FFT, editable advanced and logical operations |
Auto measurements |
Max, Min, High, Low, Ampl, Pk-Pk, Middle, Mean, CycMean, RMS, CycRMS, Period, Freq, Rise, Fall, RiseDelay, FallDelay, +Width,
-Width, FRR, FRF, FFR, FFF, LRF, LRR, LFR, LFF, +Duty, -Duty, Area, CycArea, OverSht, PreSht, Phase, 34 parameters in totaldigital
channel: Freq, Period, +Width, -Width, +Duty, -Duty, RiseDelay A→B,FallDelay A→B, Phase A→B, Phase B→A |
Measurement display |
5 types |
Measurement statistics |
Average, Max, Min, standard deviation and number of measurements |
Frequency counter |
6 bits |
Standard interfaces |
USB Host, USB Device, LAN, EXT Trig, AUX Out (Trig Out, Pass/Fail), AWG,UT-M15 logic analyzer probe, VGA |
Standard Accessories |
USB interface cable |
UT-D14 |
Passive Probe x 2/4 (1 x , 10 x switchable,300MHz,) |
UT-P06 |
Passive Probe x 2/4 (1 x , 10 x switchable,200MHz,) |
UT-P05 |
16CH Logic analyzer probe |
UT-15M |
Abu Dawood (verified owner) –
Just received the oscilloscope multimeter. It reached timely and in good packing. It is very useful tool for particularly DIYers. Finish, display and features are quite powerful for DIYers. I particularly recommend it for automotive diagnostics to capture different waveforms including Relative Compression voltage drop & current waveforms test, duty cycle measurement for automotive actuators and ECU signals, injector pulse waveform and many more. You would require an amp clamp for current waveform type compression test as current surges cross its max current range. I am loving it
Abu Dawood –
admin (store manager) –
Thank you very much for this review
admin –