| Power consumption | 700W |
| Gun temperature | 100-480oC |
| Gun type | Brushless fan |
| Air flow | 120L/MIN |
| Gun heater material | Ferro-alloys |
| Gun heater resistance | 74Ω |
| Soldering iron temperature range | 200-480oC |
| Soldering iron type | Blue type |
| Soldering iron cable | Silicagel line |
| Soldering iron heater material | high-quality heater |
| Soldering iron heater resistance | 15Ω |
| Inner box dimension(cm) | 29*20*18 |
| Outer box dimension(cm) | 59.5*41*36 |
| Outer carton box Q’TY | 8PCS/CTN |
| Prodcut weight | 2.75KG/PC |
₨14,880 ₨19,476
A 45 watt output soldering iron with temp range of 200°C – 480°C.You can also program the soldering iron to go into a “Sleep Mode” after your desired minutes of non-use (2,5,10 or 20minutes). Hot air gun can also be switched to be used in either a “Manual or Automatic Mode” and the hot air gun also has an “Automatic Cool Off Feature” which means that the hot air gun will go into a “Cool Off Period”. After it has been placed into its holder and has cooled off to a temperature of 100 Degrees Centigrade, it will enter a Standby Mode and the air will keep flowing. When it has cooled down to 100 Degrees Centigrade, the air will stop flowing and then you will know it is safe to turn the unit off.
| Weight | 2.7 kg |
|---|---|
| Dimensions | 29 × 20 × 18 cm |
| Specifications | |
| Model | UPO2104E |
| Bandwidth | 100MHz |
| Channels | 4 |
| Sampling rate | 1GS/s |
| Memory depth | 56Mpts (single channel) |
| Waveform capture rate | 83,000wfms/s |
| Time base scale (s/div) | 5ns/div~50s/div |
| Input impedance | (1MΩ±2%) II (20pF±3pF) |
| Vertical scale (V/div) | 1mV/div~20V/div (1MΩ) |
| Waveform record | 65,000 Frames |
| Trigger types | Edge, pulse width, runt, window, N-edge, delay, timeout, duration, setup/hold, slope, video, code |
| Waveform operations | A+B, A-B, A×B, A/B, FFT, logic operation, advanced |
| Auto measurements | Peak-Peak, Amplitude, Maximum, Minimum, Top, Bottom, Mean, Middle, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, Overshoot, Pre shoot, Frequency, Cycle, Rise Time, Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio, Delay A-＞B (Rising edge), Delay A-＞B (Falling edge), Delay B-＞A (Rising edge), Delay B-＞A (Falling edge). |
| Number of measurements | Display 5 measurements at the same time |
| Measurement statistics | Average, Max, Min, Standard Deviation, Number of Measurements |
| Frequency counter | Hardware 6 bits counter (Channels are selectable) |
| Standard interfaces | USB-Host, USB-Device, LAN, AUX (Trig Out, Pass/Fail) |
| General Characteristics | |
| Power | 100V~240VAC, 50Hz/60Hz |
| Display | 8 inches TFT color LCD Display with WVGA (800×480) resolution |
| Product color | White and grey |
| Product net weight | 3.5kg |
| Product size | 336mm×164mm×108mm |
| Standard accessories | Probe×2/4 (1×, 10× switchable), Power cord, USB cable |
| Standard individual packing | Carton box |
| Standard quantity per carton | 2pcs |
| Standard carton measurement | 450mm×420mm×280mm |
| Standard carton gross weight | 9.7kg |
1. 12:1 D:S ratio
Wristband design, easy and comfortable to use, doesn’t affect any movement.
Component storage slot design, can be used as temporary storage for small components and magnetize screwdriver.
Put components on the wristband anytime you want, prevent components from missing.
Strong magentic board is made of permanent magnet, strong magnetism, long service life and efficient adsorption.
Component storage slot design, can be used as temporary storage for small components and magnetize screwdriver.
Hook and loop strap design, easy and comfortable to wear.
| MODEL | 939D+ |
| RATED VOLTAGE | AC 220V±10% 50Hz |
| OUTPUT POWER | 75W |
| Constant Temperature Power (High-Speed PID Programmed to Energy Savings) | 200W±10％ |
| Withstand voltage and insulation tests | AC1500V 0.4A 60S |
| Operating Environment | 0～40℃ relative humidity＜80％ |
| Storage environment | －20～80℃ relative humidity＜80％ |
| Body size | 14.5*12*8CM |
| Weight | 2.17KG |
| Work voltage | AC 26V±10% 50Hz |
| Temperature range | 200℃～480℃ |
| Temperature Stability | ±1℃（Static） |
| Display Mode | LED Digital Display |
| Calibration Mode | PID Digitally Programmed Calibration |
| PID Temperature Calibration Cycle | 100MS |
| Heating Core | Imported High-Powered Heating Core |
| Tip-to-Ground Impedance | ＜2Ω |
| Tip-to-Ground Voltage | ＜2mV |
Model: YH-995D+
· Centigrade/Fahrenheit Programmable
· Temperature Compensation Programmable: -50 °C to +50 °C
· Manual / Automatic Programmable
· Cool Air / Hot Air Changeable
· Temperature Presettable
· Sleep Mode: 0-99 Minutes
· Samsung Dual Core Microcomputer Processor
· ESD Safe
· Total Power Consumption: 720 Watts
· Air Flow Type: Brushless Fan
· Max Air Flow Volume: 120L/min
· Hot Air Gun: 650 Watts
. Temperature Range 212° F ~ 896°F/100°C ~ 480°C with Auto Cool Down
· Hot Air Gun Temperature Stability: ±1.8°F/1.0°C
· Hot Air Gun Tube Material: 100% Silicone (Virtually No Memory)
· Soldering Iron: 65 Watts
. TemperatureRange 392°F ~ 896°F/200°C ~ 480°C
· Soldering Iron Temperature Stability: ±3.6°F/2.0°C
· Soldering Iron Cord Material: 100% Silicone (Virtually No Memory)
· Working Environment: 0°F ~ 122°F/ 0°C ~ 50°C
· Storage Environment: -68°F ~ 176°F/-20°C ~ 80°C
· Inner box Dimensions: 29*20*18cm
· Unit Weight: 3.2 KG
· QTY:8PCS/CTN
· Outer carton size:59.5*41*36cm
· G.W:25.6KG/CTN
| MODEL | 938BD+ |
| Power consumption | 135W |
| Temperature Range | 100°C~480°C/212°F~896°F |
| Display type | LCD |
| Temperature stability | ±2°C/3.6°F (static) |
| Heater voltage | AC 24V ±10% 50Hz |
| Sleep Function | 0-99 Minutes |
| Temperature Compensation Programmable | -50 °C to +50 °C |
| Working Environment | 0~40°C/32°F~104°F |
| Storage Environment | -20°C ~ 80°C/-4°F ~ 176°F |
| Soldering Iron & Hot Tweezers Cord Material | 100% Silicone (Virtually No Memory) |
UT501A Insulation Resistance Tester 
UT387S Wall Scanners 
High-temperature repair mats V51 450*300mm 
There are no reviews yet.