-
×
UT622A Digital Inductance LCR Meter
- Vendor:
superworld
Subtotal: ₨57,410
-18%
Rework & Soldering Station
YIHUA 936 Soldering Station
Availability:
Out of stock
Application Scope
Production lines for electronic products , suitable for desoldering of small solder joints ,components.
2. Repair industry for moblie phone.
3. SMD components requiring the highest precision
₨4,343 ₨5,265
Out of stock
Compare1.YIHUA 936 features rapid heating，fast temperature compensation，High-precision and
stable temperature control, this can effectively prevents cold solder joints.
2.An anti-static design effectively prevents damage to delicate components;
3.Our equipment applies the high quality metal heater which will not be twisted off and longer life.
4.Employs new solid-mold manufacturing processes, withstanding voltage and drop damage
Standard Configuration
Main unit 1set
Soldering iron handle (include iron tips and heater) 1pc
Iron holder 1pc
High temperature resistant sponge 1pc
Manual 1pc
Power plug :1pc
| Weight | 2 kg |
|---|---|
| Dimensions | 19 × 20 × 13 cm |
PRODUCT Parameters:
| parameters | |
| Rated voltage | AC 220V±10% 50Hz |
| Output power | 50W |
| Operating Environment | 0～40℃ relative humidity＜80％ |
| Storage environment | －20～80℃ relative humidity＜80％ |
| Dimensions | 36*17*11.5CM |
| Weight | 1.7KG |
| Operating voltage | AC 26V±10% 50Hz |
| Output power | |
| Temperature range | 200℃～480℃ |
| Temperature Stability | ±10℃ （Static） |
| Heating elements | Common heater |
| Tip-to-Ground Impedance | ＜2Ω |
| Tip-to-Ground Voltage | ＜2mV |
Brand
YIHUA
Based on 0 reviews
Be the first to review “YIHUA 936 Soldering Station”
-
LCR Meter
UT612 LCR Meters
UT610 series is a handheld LCR digitalelectric bridge meter with stable performance, safety, reliability and autorange. It is professional to measure inductance, capacitance and resistance. Ithas the features of low power dissipation, high accuracy and fast speed. It canselect the series-parallel measurement mode; measure the quality factor ofcomponents, the loss, the phase angle, equivalent resistance and DC resistance.It can provide up to 5 kinds of frequency under the inductance, capacitance andresistance mode to satisfy the actual requirement.
It is applicable to measuring and filtratingthe inductance, capacitance and resistance of lab, production line, maintenancepoint and teaching. It is the ideal tool of maintaining for many users.
SKU: n/a -
Corbon Mono Oxide Meter
Uni-T UT337 Carbon Monoxide Meter
Suitable for use everywhere from in the house to restaurants, offices and industrial areas, the UT337A measures the exact value of carbon monoxide (CO) present in the air. Featuring a built-in sensor integrated into the top of the unit, the UT337A measures CO content from 0-1000ppm with accuracy of ±5% (5ppm) and resolution of 1ppm. The sensor is also designed to adjust rapidly to changes, ensuring you always get a stable, accurate reading. When CO levels exceed a certain threshold, the UT337A will alert the user by using a combination of audible and LED light indicators. The alarm is configurable to the user’s specification and it is also possible to use this meter to calculate temperature values.
SKU: n/a -
Clamp Meters
UT216A 600A Digital Clamp Meters
UT216 series true RMS digital clamp meter is a new-generation practical electrotechnical measurement meter which has the features of high reliability, high safety, automatic range and handheld type, has full-range overload protection and unique appearance design, is more excellent in performance, and is an ideal tool for detection, maintenance and repair of various universities and colleges, smelting, communication, manufacturing, petroleum, national defense, electrical, power and circuit equipment.
UTD216A (main features)- 1、600A AC current measurement
- 2、True RMS response for ACV and ACA
- 3、99.99mF capacitance measurement
- 4、Non-contact voltage detection with LED indication
- 5、Flashlight for working at dark environment
SKU: n/a -
Wire & Cable Testers
UT681C Cable Tester
Main Features
1. Tests Ethernet cables and telephone lines
2. Equipped with RJ45 interface for Ethernet cable and RJ11 interface for telephone line testing
3. Ethernet cables: Shielded/Unshielded test
4. Visible LED indication
5. Automatically check circuit breakage, short circuit and cross circuit
6. Can toggle between fast and slow speed test modes
7. Single key operation
8. Manual/auto power off (after 10-minute inactivity)
9. Low battery indication
10. Power supplied by 9V layer-built battery
SKU: n/a
Related products
-
Rework & Soldering Station
YH 853D 5A-II ALL IN 1 REWORK STATION
A multi-station that fully integrates 3 professional stations that satisfy a broad range of soldering, reworking, and testing applications. Professional all-round performance and user experience for flexible applications. Advanced technologies, including precision temperature stabilization, temperature calibration, sleep mode, zero-airflow protection, automatic shut-down, and more
SKU: n/a -
Rework & Soldering Station
YH 938D SMD STATION
1.High-power heater, tweezers parallel design. When need to remove the electronic components, you can use the parallel tweezers to heating the components and weld joints. It is easily and quickly to removed element without prejudice to the case of peripheral devices. It is used for different weld joints de-soldering ,more suitable for large joints, especially for factory batch job, one time can weld two points, it’s high efficiency.
2.Programmable temperature control, PID technology, the most high-precision PID implant procedures, tracking and detection of high-speed machine tweezers actual temperature and corrected. Magic temperature compensation speed so that the temperature error is small, temperature stability and temperature compensation is much faster than the same type of product.
3. To meet the market needs of different regions, the addition of Fahrenheit / Celsius temperature conversion function, the user can choose according to customary interest.
4.10 minutes fixed sleep function, up to 10 minutes without the use of iron, automatically enter sleep mode, energy and prolong tip life.
5.Parallel electric tweezers design, very convenient for small electronic components,chip, chip removal and installation of welded components. When you need to remove the parallel electric tweezers can be used directly on the welding points across the resistor components for heating.SKU: n/a -
Rework & Soldering Station
YH 899D REWORK STATION
Power consumption 700W Gun temperature 100-480oC Gun type Brushless fan Air flow 120L/MIN Gun heater material Ferro-alloys Gun heater resistance 74Ω Soldering iron temperature range 200-480oC Soldering iron type Blue type Soldering iron cable Silicagel line Soldering iron heater material high-quality heater Soldering iron heater resistance 15Ω Inner box dimension(cm) 29*20*18 Outer box dimension(cm) 59.5*41*36 Outer carton box Q’TY 8PCS/CTN Prodcut weight 2.75KG/PC SKU: n/a -
Rework & Soldering Station
YIHUA 937D Repairing Soldering Iron
Standard Configuration
Main unit 1set
Soldering iron handle (include iron tips and heater) 1pc
Iron holder 1pc
High temperature resistant sponge 1pc
Manual 1pc
Power plug :1pc
Application Scope
Production lines for electronic products ,.
2. Repair industry for moblie phone.
3. SMD components requiring the highest precision.
SKU: n/a
There are no reviews yet.