-
×
MC TIP OT IS
- Vendor:
superworld
Subtotal: ₨900
-9%
SOLDERING IRON WOOD 500W BLUE
Brand
China Brand
Based on 0 reviews
Be the first to review “SOLDERING IRON WOOD 500W BLUE”
-
Insulation Tester
MIC-5001, 5000V Insulation Tester
Insulation resistance measurement in a compact, light-weight, low-cost design.
- Measurement to 5 TΩ
- Measuring voltage selectable from 50 V to 500 V range in 50 V steps, and from 500 V to 5000 V range in 100 V steps
- Continuous indication of insulation resistance or leakage current
- Automatic discharge of stored charge due to capacitance of tested object after the insulation resistance measurement
- Audio beeps every five seconds to alert user test is proceeding, and to get time characteristics
- Measured test times of T1, T2 and T3 for measuring Absorption Coefficient, Dielectric Absorption Ratio DAR. and Polarization Index PI
- Continuous display of test voltage during the measurement
- Protection against measuring live objects
- Two and three-lead measurement method
- Ramp Test Insulation resistance measurement
- Measurement of breakdown voltage with increments up to 1 kV / s
- Measurement of alternating and direct voltages from 0 V to 750 V
- 990 cells of memory (11880 records) to record results
- Data transfer to PC via USB cable
- Built-in rechargeable battery pack
- Meets the requirements of the EN 61557 standard
- Charge from optional car lighter (12 V) socket accessory
SKU: n/a -
Wire & Cable Testers
LKZ-720 Wires and pipe locator
Features:
- the function 3D in the receiver – detecting the direction of current flow and accurate locating the object,
- phase detection mode,
- receiver operation with four transmitters at the same time to locate interruptions or distinguish wires,
- a LED bright torch,
- headphone socket in receiver,
- screens backlight for work in dark,
- transmission battery status and settings of the transmitter to the receiver
- operation in wide range of rated voltage, up to 500V RMS,
- measurement of voltage at the object to 500 Vrms,
- three levels of transmitter amplification,
- automatic or manual selection of transmitter operation modes,
- five modes of wire tracer operation – voltage, current, current-voltage, power and clamp,
- software upgrade via USB,
- additional accessories enable precise localization – such as contact or non-contact probes and measurement clamp.
SKU: n/a -
Tool Kits
JM 8175 TOOL KIT
Our JM-8175 smartphone screwdriver set is covered by a double-sided outer box with strong magnet parts that will not be easy to fall off when opening the box.
The smartphone screwdriver has an aluminum alloy handle with a 360-degree rotating cap, magnetic connector, and non-slip texture design, which makes it applies to various maintenance scenarios.SKU: n/a -
Clamp Meters
UT206A+
1. 1000A AC current measurement
2. 1000V AC/DC voltage measurement
3. 600A inrush current measurement (UT206A+)
4. Temperature (UT206A+)
5. NCV (UT206A+)
6. ACV frequency 10Hz～10kHz
7. Jaw opening: 45mm
8. Resistance / capacitance / frequency measurement
9. Auto range / backlight / low battery indication
10. Continuity / diode / duty cycle
11. MAX/MIN
12. Data hold / flashlight / relative mode
13. Auto power off
14. CAT II 1000V/CAT III 600VSKU: n/a
Related products
-
Soldering Iron
YH 133A ELEMENT FOR 907A,907C
Features Of Soldering Iron Heating Element YH-133A For 907A,907C:
- Suitable for YIHUA 936, 937D, 878serial, 852 serial, 898D, 898BD, 862D, 8786D, 868D and so on.
- If the soldering iron is burned, use the heating core to replace the old one.
- Stainless steel materials.
- Fast heating.
- 100% brand new product.
- Made of high-quality material.
SKU: n/a
There are no reviews yet.