-9%

UNI-T 2 Channel UPO2102E Ultra Phosphor Oscilloscope


  • 100MHz bandwidth
  • number of channels 2
  • sampling 1GS / s
  • max memory depth 56Mpts (per channel) (previously 28Mpts per channel)
  • waveforms per second up to 80,000 wfms/s (formerly 50,000 wfms/s)
  • time base range 5ns/div – 50s/div
  • input coupling (1MΩ ± 2%) // (20pF ± 3pF)
  • verical axis 1mV/div – 20V/div (1MΩ)
  • DC gain accuracy ± 3%
  • number of saved waveforms 65000
  • trigger : Edge, Window, Runt, Time Out, Nth Edge, Delay, Duration, Setup / Hold, Pulse Width, Slope, Video, Pattern, RS232 / UART, I2C, SPI
  • mathematical operations with waveforms : A + B, A-B, AxB, A / B, FFT, Logic operation, Editable Advanced, Filter
  • automatic Measurement : Max, Min, High, Low, Middle, Pk-Pk, Ample, Mean, Cycle Mean, RMS, Cycle RMS, Cycle Area, OverShoot, PreShoot, Period, Freq, Rise, Fall, + Width, -Width, + Duty, -Duty, RiseDelay, FallDelay, Phase, FRR, FRF, FFR, FFF, LRF, LRR, LFR, LFF
  • number of measurements : 5 simultaneous measurements
  • statistics : Mean, Max, Min, standard deviation, number of measurements
  • frequency counter : 6 bits
  • standard interfaces : USB-Host, USB-Device, LAN, AUX (Trig Out, Pass / Fail)

154,800 170,610

Compare

UNI-T 2 Channel UPO2102E Ultra Phosphor Oscilloscope

The UPO2102E oscilloscope is a digital oscilloscope with Ultra Phosphor technology from the UPO2000E series. The UPO2102E oscilloscope offers 2 channels with the same characteristics. It is also equipped with sampling rate of 1 GS/s. This is amply sufficient for a bandwidth that is 100 MHz (unlike the lower versions of UPO2072CS, UPO2074CS, UPO2072E and UPO2074E, which are only up to 70 MHz). It is a multifunctional, high-performance oscilloscope that is easy to use, with very good technical specifications. It features a 800 x 480 pixel display. Supports USB storage and PC communication via Plug and play USB. Compared to the previous version UPO2102CS differs in new software (firmware).

Category:

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UNI-T 2 Channel UPO2102E Ultra Phosphor Oscilloscope”

There are no reviews yet.

  • TDGC 1000VA

    0 out of 5
    (0)

    Input Voltage=220V/230V
    Output Voltage=0-250V
    Maximum Output Current=4
    Copper Wind
    LCD Output Display
    Three Pin Output Socket

    SKU: n/a
  • SVC 5000VA

    0 out of 5
    (0)

    Input=120V 270
    Output=220
    Under and Over Volt Protection
    Surge Protection
    Over Load and Heat Protection
    Copper Wind with LCD Display

    SKU: n/a
  • LM80 Laser Distance Meter

    0 out of 5
    (0)

    1. Ergonomic exterior, comfortable handling

    2. Millimeter accuracy
    3. Large, multiple angle HD display
    5. Physical and electronics leveler
    6. Multiple functions: Max/Min/continuous measurement, displacement calculation, data storage, and more
    7. Auto power off after 3 minutes without operation
    SKU: n/a
  • LM573 Laser Levelers

    0 out of 5
    (0)

    Features of LM570/585 Series Laser Levelers

    Certificates (LM573LD-II only): CE, UKCA

    ● Osram LD green laser
    ● Self-leveling mode & manual mode
    ● Outdoor pulse mode

    ● 5200mAh Li-ion battery
    ● Type-C DC-in port
    ● Complimentary bracket

    SKU: n/a
  • UTD2072CEX-II Digital Storage Oscilloscope

    0 out of 5
    (0)

    1. 2 channels

    2. 70MHz/100MHz bandwidth; 1GSa/s real-time sampling rate
    3. Up to 28Mpts memory depth
    4. Calibration signal output: 10Hz, 100Hz, 1kHz (by default),
    10kHz or 100kHz
    5. Max 10Mpts waveform record
    6. 8-inch TFT LCD, WVGA (800X480)
    SKU: n/a
  • UT52 Standard Digital Multimeters

    0 out of 5
    (0)

    UT50 series is a manual range digital multimeter. Lrage display,multi purpose use.Ac dc volts,ac dc amperes resistance and buzzer functions.

    SKU: n/a