UPO2104CS 4 Channels Ultra Phosphor Oscilloscope

Availability:

Out of stock


Features and Benefits:
1、Sample Rate up to 1GS/s;
2、Channels 4;
3、Bandwidth 100MHz,;
4、Memory Depth 28Mpts (Standard);
5、Waveform Capture Rate up to 50,000wfms/s;
6、With 256 level intensity grading display;
7、Up to 65,000 frames for Waveform Record ,Replay;
8、Support serial bus trigger and decoding;
9、8 inches, TFT LCD,WVGA(800*480);
10、Interface:USB Host, USB Device, LAN, VGA, AUX OUT, 10MHz input/output.

0

Out of stock

Compare

Features and Benefits:
1、Sample Rate up to 1GS/s;
2、Channels 4;
3、Bandwidth 100MHz,;
4、Memory Depth 28Mpts (Standard);
5、Waveform Capture Rate up to 50,000wfms/s;
6、With 256 level intensity grading display;
7、Up to 65,000 frames for Waveform Record ,Replay;
8、Support serial bus trigger and decoding;
9、8 inches, TFT LCD,WVGA(800*480);
10、Interface:USB Host, USB Device, LAN, VGA, AUX OUT, 10MHz input/output.

SKU: UP21O02CSMHZ Category:
Models UPO2104CS
Bandwidth 100 MHz
Channels 4
Sample Rate 1GS/s
Max. Memory Depth 28Mpts
Waveform Capture Rate 50,000wfms/s
Time Base Scale 2 ns/div 至50 s/div
Input Coupling (1MΩ± 1%)||(13 pF± 3 pF)
Vertical Scale 1mV/div 至20 V/div(1 MΩ)
DC Gain Accuracy ±3%
Waveform Record 65,000 Frames
Trigger Edge, Alternate, Runt, Super picture, Nth Edge, Delay, Duration, SetupHold, Pulse Width, Slope, Video, Pattern, RS232/UART,I2C,SPI, USB
Bus Decode Standard:Parallel; Optional:RS232/UART,I2C,SPI, USB
Waveform Operation A+B、A-B、A×B、A/B、FFT、Editable Advanced
Auto Measurement Peak-Peak Value, Amplitude, Maximum, Minimum, Top Value, Bottom Value, Mean, Average, Root Mean Square Value, Overshoot, Preshoot, Frequency, Cycle, Rise Time, Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio, Delay 1->2, and Delay 2->1.
Number of Measurements Display 5 measurements at the same time
Measurement Statistic Average, Max, Min, Standard Deviation, Number of Measurements
Frequency Counter Hardware 6 bits counter (Channels are selectable)
Standard Interface USB-Host, USB-Device, LAN,10MHz Input/Output, AUX Output (TrigOut, Pass/Fail)
General Characteristic
Power 100V~240VACrms, 45Hz~440Hz
Display  8 inches, TFT LCD, WVGA(800×480)
Product Color White and Gray
Product Net Weight 3.5 kg ± 0.2 kg
Product Size (W×H×D) 336mm × 163.8mm × 105mm
Standard Accessories Probe×2/4(1×,10× switchable),Power Cord ,USB Cable, PC Software CD
Standard Individual Packing Gift Box, English Manual

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UPO2104CS 4 Channels Ultra Phosphor Oscilloscope”

There are no reviews yet.

  • YIHUA 303D DC Power Supply

    0 out of 5
    (0)

    Feature

    303D communication maintenance power supply is a single line output of stabilized high accuracy

    DC stabilized power supply. The output voltage and current can be adjusted continuously within the

     rated range. The load current has MA conversion with two settings: 0-3A and 0-99 mA. Constant

    voltage and constant current (CV/CC), automatic switching of working modes. Double digital display

    shows output voltage and current independently. Several protection functions include current

     limitation, voltage reduction, short circuit protection, over-temperature protection, etc. The design

     is applied to production line of the plant, maintenance, laboratories and is also a necessary device

    for the communication industry.

    SKU: n/a
  • TDR-420 Time Domain Reflectometer/ Cable Fault Locator

    0 out of 5
    (0)

    Product features

    • Possibility damage-free location of impedance changes of tested cables and wires such as:
      • shorted conductor,
      • open conductor / end of cable – useful during the inventory of warehouses and stores,
      • splice,
      • splitter,
      • water ingress,
      • wet splice,
      • bridge tap
      • or other changes.
    • Single measurement mode ONCE,
    • Continuously measurement mode CONT,
    • Tone signal generator TONE,
    • Two cursors to mark two places of damage along with an indication of the distance between them,
    • Built-in HELP function for easier interpretation of the reflectogram,
    • 11 available measuring ranges from 7 m to 6000 m,
    • „dead zone” limited to 0.6 m,
    • Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
    • manually set of sensitivity in 8 steps GAIN,
    • output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
    • Velocity of Propagation set in range from 10% to 99%,
    • tight and durable housing with IP67 ingress protection degree.
    • Small size and weight.
    SKU: n/a