No products in the cart.
-1%
Clamp Meters
UT 278A+ Series Clamp Earth Ground Testers
● Auto range
● Data hold
● Data recall
● LCD backlight
● Resistance limit alarm
● Low battery indication
● Auto calibration
₨94,200 ₨95,000
UT270+ Series Clamp Earth Ground Testers
UT270 series can quickly and safely measure the grounding system without disconnecting circuit ground lines or the need of auxiliary electrodes. It can measure resistance from 0.01Ω with a resolution of 0.001Ω. UT275 can also measure leakage current up to 30A. These clamps’double insulation design makes them durable tools for outdoor work and effective in blocking interference from the environment.
Brand
UNI T
Based on 0 reviews
Be the first to review “UT 278A+ Series Clamp Earth Ground Testers”
-
Multimeters
CMM-11 Multimeter
- manual and automatic range selection
- HOLD function for holding measured values
- MAX/MIN” function for displaying extreme values
- compact housing – allows to store the device in a pocket
- increased resistance to falls from heights above 2 m thanks to the elastomer coating
- built-in Bluetooth module for data transfer to mobile devices
- built-in flashlight for lighting the measuring places
- Beeper for sound signal circuit continuity
- Auto-OFF function for automatic switching off of the unused device
- display 3¾ digit (count max 4000)
SKU: n/a -
Wire & Cable Testers
UT681C Cable Tester
Main Features
1. Tests Ethernet cables and telephone lines
2. Equipped with RJ45 interface for Ethernet cable and RJ11 interface for telephone line testing
3. Ethernet cables: Shielded/Unshielded test
4. Visible LED indication
5. Automatically check circuit breakage, short circuit and cross circuit
6. Can toggle between fast and slow speed test modes
7. Single key operation
8. Manual/auto power off (after 10-minute inactivity)
9. Low battery indication
10. Power supplied by 9V layer-built battery
SKU: n/a -
Analog Multimeters
ANALOG METER YX 360TR BS
Features Of Handheld YX-360TRE-B Analog Meter Voltmeter:
- High accuracy analogue multimeter for general purposes.
- Mirrored needle indicator with an accurate reading.
- Check both AC and DC parameters with continuity buzzer on Ohms.
- Up to 1000V on both AC and DC Voltage.
- 19 versatile ranges for general-purpose testing.
- Fuse & Diode protection.
- Compact sizing.
- Tilt back-stand.
- The large and mirrored scale of 80mm length.
SKU: n/a
Related products
-
Clamp Meters
UT219E ACA Professional Clamp Meters
Features
1. 2m drop proof, IP54, CAT IV 600V
2. Large 6000-digit LCD backlight (auto) display
3. True RMS
4. LoZ voltage test, for ghost voltage measurement
5. MAX/MIN/REL testing mode, data hold, excluding the test lead interference of resistance measurement
SKU: n/a -
Clamp Meters
MS 2109A ACA DCA Digital Clamp Meters
● Display 6000 counts
● Jaw Opening Ф26mm/1.0″
● Auto Ranging
● Auto Power Off
● Non-Contact Voltage Detector
● Relative Measurement
● Diode Open Volatge 2.7V
● Continuity Buzzer <50±20Ω
● MAX/MIN
● Data Hold
● Display Backlight
● Work Light
● Low Battery DisplaySKU: n/a -
Clamp Meters
UT 208 CLAMP METER
1. 1000A AC/DC current measurement, 3 times/s sampling rate
2. True RMS3. Inrush current4. Zeroing function5. Full icon display6. MAX/MIN7. Data hold; Duty cycle8. Auto power off and low battery indication9. Point contact temperature probe10. Diode; Continuity buzzer; Input Impedance for DCVSKU: n/a -
Clamp Meters
UT 207 CLAMP METER
1. 1000A AC/DC current measurement, 3 times/s sampling rate 2. True RMS 3. Inrush current 4. Zeroing function 5. Full icon display 6. MAX/MIN 7. Data hold; Duty cycle 8. Auto power off and low battery indication 9. Diode; Continuity buzzer; Input Impedance for DCV
SKU: n/a
There are no reviews yet.