-20%

UT L28 Meter Lead

Availability:

20 in stock
Add to Wishlist
Compare
  • Suitable for digital multimeter testing, convenient to use.
  • Used to test current,voltage,resistance,capacitance,frequency,etc.
  • Test pen tip with rubber shrouded protection, prevent wear and lasting use.
  • High quality, it’s a good tool and brings a lot of conveniences.
  • Double insulated wire.
  • Removable tip shield sleeve.
  • Banana plug input terminal, general type probes.● Leads length: 900mm, Rod length: 128mm
    ● Tip length: 16.8mm
    ● Safety level: CAT III 1000V/CAT IV 600V 10A
    ● Safety certificate: EN 61010-031 A1:2015
    ● Features and application: Double insulated wire, removable

₨1,052 ₨1,317

20 in stock

Compare

● Leads length: 900mm, Rod length: 128mm

● Tip length: 16.8mm
● Safety level: CAT III 1000V/CAT IV 600V 10A
● Safety certificate: EN 61010-031 A1:2015
● Features and application: Double insulated wire, removable t
Category:
Weight 0.1 kg
Dimensions 10 × 2 × 3 cm

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UT L28 Meter Lead”

There are no reviews yet.

  • UT18D Voltage and Continuity Tester

    UT18D Voltage and Continuity Tester

    0 out of 5
    (0)

    1. Auto power off, the conductor to be measured is greater than 12V

    2. Phase rotation test
    3. Continuity test with buzzer and LED indication
    4. Low battery indication and over voltage prompt
    5. Flashlight
    6. Test live voltage without batteries
    7. Buzzer and silent modes available
    8. Auto range
    9. Polarity indication
    SKU: n/a
    ₨12,000 ₨13,000
    Add to cart
    Add to Wishlist
    Compare

  • UTP 3305C DC POWER SUPPLY

    UTP 3305C DC POWER SUPPLY

    0 out of 5
    (0)
    Specifications
    Model UTP3305C
    Output voltage 0~30V (CH1/CH2)
    Output current 0~5A (CH1/CH2)
    Output power 315W
    Load regulation Voltage <0.01%+5mV
    Current <0.1%+10mA
    Line regulation Voltage <0.01%+3mV
    Current <0.1%+3mA
    Resolution Voltage 10mV
    Current 1mA
    Accuracy (25℃±5℃) Voltage <0.5%+20mV
    Current <0.5%+10mA
    Ripple (20Hz~20MHz) Voltage ≤2mVrms
    Current ≤3mArms
    Output temperature
    coefficient    		 Voltage ≤150ppm
    Current ≤150ppm
    Voltage rise delay ≤100ms (10% rated load)
    Parallel/Series load regulation ≤0.1%+0.1V
    CH3 output features Voltage 5V
    Current 3A
    Voltage accuracy ±50mV
    Load regulation ±50mV
    Interfaces USB Device, RS-232
    General Characteristics
    Power AC 100V/120V/220V/230V±10%, 50Hz/60Hz
    Display 4 windows, LED
    Product net weight 9.1kg
    Product size 260mm x 176mm x 317mm
    Standard accessories USB and RS-232 interface cables, output cables
    Standard individual packing Carton box
    Standard quantity per carton 1pcs
    Standard carton measurement 440mm x 388mm x 295mm
    Standard carton gross weight 10kg
    SKU: n/a
    ₨100,000 ₨110,000
    Add to cart
    Add to Wishlist
    Compare

  • YH 938D SMD STATION

    YH 938D SMD STATION

    0 out of 5
    (0)

    1.High-power heater, tweezers parallel design. When need to remove the electronic components, you can use the parallel tweezers to heating the components and weld joints. It is easily and quickly to removed element without prejudice to the case of peripheral devices. It is used for different weld joints de-soldering ,more suitable for large joints, especially for factory batch job, one time can weld two points, it’s high efficiency.

    2.Programmable temperature control, PID technology, the most high-precision PID implant procedures, tracking and detection of high-speed machine tweezers actual temperature and corrected. Magic temperature compensation speed so that the temperature error is small, temperature stability and temperature compensation is much faster than the same type of product.

    3. To meet the market needs of different regions, the addition of Fahrenheit / Celsius temperature conversion function, the user can choose according to customary interest.

    4.10 minutes fixed sleep function, up to 10 minutes without the use of iron, automatically enter sleep mode, energy and prolong tip life.
    5.Parallel electric tweezers design, very convenient for small electronic components,chip, chip removal and installation of welded components. When you need to remove the parallel electric tweezers can be used directly on the welding points across the resistor components for heating.

    SKU: n/a
    ₨16,800 ₨18,000
    Add to cart
    Add to Wishlist
    Compare
  • ,

    YH 928D-II Soldering Iron

    ,

    YH 928D-II Soldering Iron

    0 out of 5
    (0)

    1. Application of sensor temperature control circuit, microcomputer temperature control technology, accurate temperature, rapid heating, fast temperature compensation, is a with LED digital precision display portable constant temperature soldering iron.

    2. Application of high precision switching power supply technology, small size, light weight, easy to carry.

    3. Equipped with digital temperature correction function, sleep function, Fahrenheit / Celsius display conversion function.

    4. Application of unique design of high-precision LED display, showing clear and beautiful.

    5. Equipped with LED lights, in the case of lacking light, open the lights, so that soldering is more desirable and human.

    SKU: n/a
    ₨4,560 ₨6,355
    Add to cart
    Add to Wishlist
    Compare

  • UTG932E Function/Arbitrary Waveform Generator

    UTG932E Function/Arbitrary Waveform Generator

    0 out of 5
    (0)
    Specifications
    Model UTG932E
    Channel 2
    Max frequency 30MHz
    Sampling rate 200MS/s
    Vertical resolution 14 bits
    Waveforms Sine, square, pulse, ramp, noise, DC, arbitrary
    Sweep modes Logarithmic, linear
    Frequency Characteristics
    Sine 1μHz~30MHz
    Square 1μHz~15MHz
    Ramp 1μHz~400kHz
    Pulse 1μHz~15MHz
    Arbitrary 1μHz~10MHz
    Resolution 1μHz
    Accuracy Within 90 days ± 50ppm
    Within 1 year ± 100ppm
    18℃~28℃
    Output Characteristics
    Impedance 50Ω/High Z
    Amplitude range 1mVpp~10Vpp (50Ω); 2mVpp~20Vpp (high Z)
    DC offset range (AC+DC) ±5V (50Ω); ±10V  (high Z)
    Amplitude resolution 1mV
    General Characteristics
    Power 100~240VAC, 50Hz/60Hz
    Display 4.3”TFT LCD (480×272)
    Product color White and grey
    Product net weight 0.33kg
    Product size 172mm x 90mm x 68mm
    Standard accessories USB interface cable, power cord, BNC cable with alligator clips
    Standard individual packing Carton box
    Standard quantity per carton 4pcs
    Standard carton measurement 435mm x 360mm x 125mm
    Standard carton gross weight 3.8kg
    SKU: n/a
    ₨50,400 ₨55,685
    Add to cart
    Add to Wishlist
    Compare

  • YH 939D+ SOLDERING STATION

    YH 939D+ SOLDERING STATION

    0 out of 5
    (0)
    PARAMETROS
    MODEL 939D+
    RATED VOLTAGE AC 220V±10%  50Hz
    OUTPUT POWER 75W
    Constant Temperature Power (High-Speed PID Programmed to Energy Savings) 200W±10％
    Withstand voltage and insulation tests AC1500V 0.4A 60S
    Operating Environment 0～40℃  relative humidity＜80％
    Storage environment －20～80℃  relative humidity＜80％
    Body size 14.5*12*8CM
    Weight 2.17KG
    Work voltage AC 26V±10%  50Hz
    Temperature range 200℃～480℃
    Temperature Stability ±1℃（Static）
    Display Mode LED Digital Display
    Calibration Mode PID Digitally Programmed Calibration
    PID Temperature Calibration Cycle 100MS
    Heating Core Imported High-Powered Heating Core
    Tip-to-Ground Impedance ＜2Ω
    Tip-to-Ground Voltage ＜2mV
    SKU: n/a
    ₨8,764 ₨10,900
    Read more
    Add to Wishlist
    Compare

Related products

  • UT L30 Meter Lead

    UT L30 Meter Lead

    0 out of 5
    (0)

    ● Leads length: 900mm, Rod length: 136mm

    ● Tip length: 15.7mm
    ● Safety level: CAT III 1000V/CAT IV 600V 10A
    ● Safety certificate: EN 61010-031 A1:2015
    ● Features and application: Double insulated UL authenticated
    SKU: n/a
    ₨1,052 ₨1,185
    Add to cart
    Add to Wishlist
    Compare

  • UT-L40 SMD patch clamp

    UT-L40 SMD patch clamp

    0 out of 5
    (0)
    • Leads length: 450mm
    • Probe length: 5mm
    • Temperature condition: -10°C～40°C
    • Safety level: CAT Ⅱ1000V 2A
    • Features and application: used to SMT components, for UT611, UT612
    • Amount: 1PCS

     

    SKU: n/a
    ₨1,320 ₨1,570
    Add to cart
    Add to Wishlist
    Compare

  • UT L25 Meter Lead

    UT L25 Meter Lead

    0 out of 5
    (0)
    • Suitable for digital multimeter testing, convenient to use.
    • Used to test current,voltage,resistance,capacitance,frequency,etc.
    • Test pen tip with rubber shrouded protection, prevent wear and lasting use.
    • High quality, it’s a good tool and brings a lot of conveniences.
    • If you want to change your multimeter test lead, this is a great choice.
    • Double insulated wire.
    • Removable tip.
    SKU: n/a
    ₨1,080 ₨1,308
    Add to cart
    Add to Wishlist
    Compare

  • UT-L21 Probe UT-L Probes and Test Leads

    UT-L21 Probe UT-L Probes and Test Leads

    0 out of 5
    (0)

    Leads length: 900mm

    Rod length: 133mm
    Tip length: 15.8mm
    Safety level: CAT Ⅲ 1000V/CAT Ⅳ 600V 20A
    Features and application: cross plug with shield sleeve, general type probe
    Amount: 1PCS

    SKU: n/a
    ₨840 ₨872
    Add to cart
    Add to Wishlist
    Compare
Got Questions ? Call us 24/7! 03324478447
© Mart pakistan.com , best price in pakistan - All Rights Reserved
Got Questions ? Call us 24/7! 03324478447