Insulation Tester
UT502A Insulation Resistance Tester
Availability:
Out of stock
1. 2000 count LCD display, overload indication, backlight
2. AC voltage measurement, auto power off
3. Auto discharge
4. Continuous measurements mode, red warning light and buzzer function
5. Continuous low resistance measurement
6. PI and DAR measurement, auto resistivity calculation
7. Low resistance returning to zero function to improve accuracy
₨24,852 ₨30,793
Out of stock
CompareUT500 series insulation testers are used to measure the insulation resistance of electrical equipment and household appliances. This is done by measuring the insulation resistance between electrical circuits or between circuits and ground. UT500 series can measure insulation resistance, AC Voltage, low resistance, PI (Polarization Index) and DAR (Dielectric Absorption). These are dieal tools for ensuring transformers, genera-tors, high voltage motors, power capacitors, power cbles, arresters and other electrical equipment that can oprate in a safe and accurate manner.
Applications:
It is used for insulation resistance measurement for insulation materials and various kinds of electric equipments such as transformer, electric machines, cables, switches, electrical appliance, a ideal tool for electric maintenance, testing and inspection.
Weight | 0.5 kg |
---|---|
Dimensions | 15 × 10 × 7 cm |
Specifications | Range | UT502A | |
Insulation resistance (Ω) | Test voltages | 500V/1000V/2500V | 0%~10% |
500V | 0MΩ~99.9MΩ | ±(3%+5) | |
100MΩ~5GΩ | ±(5%+5) | ||
1000V | 0MΩ~99.9MΩ | ±(3%+5) | |
100MΩ~5GΩ | ±(5%+5) | ||
2500V | 0MΩ~99.9MΩ | ±(3%+5) | |
100MΩ~9.9GΩ | ±(5%+5) | ||
10GΩ~20GΩ | ±(10%+5) | ||
Load current | 50V (R=50kΩ) 1mA | 0%~10% | |
100V (R=100kΩ) 1mA | 0%~10% | ||
250V (R=250kΩ) 1mA | 0%~10% | ||
500V (R=500kΩ) 1mA | 0%~10% | ||
1000V (R=1MΩ) 1mA | 0%~10% | ||
2500V (R=1MΩ) 1mA | 0%~10% | ||
Short-circuit current | <2mA | ||
Low resistance (Ω) | 0.01Ω~200Ω (about 5.0V/>200mA) | ±(2%+3) | |
AC voltage (V) | 30V~600V | ±(2%+3) | |
Features | |||
Display count | 2000 | ||
DAR | 60s/15s and 60s/30s | √ | |
PI | √ | ||
Auto range/Low battery indication | √ | ||
LCD backlight/Light alarm | √ | ||
Buzzer alarm/High voltage indication | √ | ||
Over load indication/Auto discharge | √ | ||
Test voltage secondary display | √ | ||
10MΩ internal resistance test | √ | ||
Meets IEC 61557 | 61557-1:2007; 61557-2:2007; 61557-4:2007 | ||
General Characterisitics | |||
Power | 1.5V battery (LR6) x 6 | ||
Display | 70.6mm x 34mm | ||
Product color | Red and grey | ||
Product net weight | 500g | ||
Product size | 150mm x 100mm x 71mm | ||
Standard accessories | Batteries, test leads, alligator clips, gallus, test probes | ||
Standard individual packing | Gift box, carrying bag, English manual | ||
Standard quantity per carton | 20pcs | ||
Standard carton measurement | 500mm x 380mm x 330mm (0.063 CBM per standard carton) | ||
Standard carton gross weight | 18.9kg |
Based on 0 reviews
Be the first to review “UT502A Insulation Resistance Tester”
-
Clamp Meters
UT202BT Smart AC Clamp Meter
1. Button-design clamp meter
2. One-hand operation and easy to use
3. True RMS / 9999 counts
4. Jaw opening: 28mm
5. Bluetooth 5.0
6. 600V DC voltage measurement
7. 600V AC voltage measurement
8. 600A AC current measurement
9. Inrush current measurement
10. Dual display: V+HZ and A+HZ
11. Temperature measurement
12. Low pass filter measurement
13. Bright backlight / Flashlight
14. Non-contact voltage (NCV)
15. CAT III 600VSKU: n/a -
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
Clamp Meters
UT219DS ACA DCA Professional Clamp Meters with Motor LPF Test
- UT-219 professional clamp meter series is three-proofing digital clamp meter specially designed for professional industrial users.
- The industrial design of this series is rugged and durable, and capable of withstanding the impact from 2 meters fall-down.
- The waterproof rating is up to IP54; therefore, it can be used in environment with water splashing or much more dust.
- The whole series is configured with LoZ (Low Impedance Input) AC voltage tap position, which is capable of testing the false voltage; auto backlight function can be used continuously under the circumstance of emergency power outage.
- UT-219DS is also provided with MOTOR test function, allowing to directly test the phase sequence of three phase AC motor by means of the probe. UT-219 series is much more in compliance with CAT IV 600V safety level, and certified by the German GS institution.
SKU: n/a -
Analog Multimeters
ANALOG MULTIMETER MF 47A
Features:
1. Multifunctional, can measure ac/dc voltage, dc current, resistance, battery test, capacitance, hfe. 2. Buzzer alarm: when it is below 50, it will wake up the alarm. 3. Battery Test: Large measuring range of 1.2-3.6v. 4. Accurate and Reliable: Clear dial, clear measurement results and high efficiency. 5. Audio Level Meter: Designed to measure amplifier gain and transmission losses with given impedant load and the measurement unit is db.
SKU: n/a -
Earth Ground Resistance Testers
MRU-21 Earth Resistance Meter
Possible measurements:
- earth resistance measurment with 3-pole method,
- measurement of continuity of equipotential bondings and protective conductors with auto-zero function – with current 200 mA,
- resistance measurement using 2-pole method.
SKU: n/a
There are no reviews yet.