● Output waveforms: Sine, square, pulse, ramp, noise, DC, arbitrary
Arbitary Waveform Generator
UTG932E Function/Arbitrary Waveform Generator
Availability:
5 in stock
Specifications | |
Model | UTG932E |
Channel | 2 |
Max frequency | 30MHz |
Sampling rate | 200MS/s |
Vertical resolution | 14 bits |
Waveforms | Sine, square, pulse, ramp, noise, DC, arbitrary |
Sweep modes | Logarithmic, linear |
Frequency Characteristics | |
Sine | 1μHz~30MHz |
Square | 1μHz~15MHz |
Ramp | 1μHz~400kHz |
Pulse | 1μHz~15MHz |
Arbitrary | 1μHz~10MHz |
Resolution | 1μHz |
Accuracy | Within 90 days ± 50ppm |
Within 1 year ± 100ppm | |
18℃~28℃ | |
Output Characteristics | |
Impedance | 50Ω/High Z |
Amplitude range | 1mVpp~10Vpp (50Ω); 2mVpp~20Vpp (high Z) |
DC offset range (AC+DC) | ±5V (50Ω); ±10V (high Z) |
Amplitude resolution | 1mV |
General Characteristics | |
Power | 100~240VAC, 50Hz/60Hz |
Display | 4.3”TFT LCD (480×272) |
Product color | White and grey |
Product net weight | 0.33kg |
Product size | 172mm x 90mm x 68mm |
Standard accessories | USB interface cable, power cord, BNC cable with alligator clips |
Standard individual packing | Carton box |
Standard quantity per carton | 4pcs |
Standard carton measurement | 435mm x 360mm x 125mm |
Standard carton gross weight | 3.8kg |
₨50,400 ₨55,685
5 in stock
Compare● Output frequency range: 1μHz-30MHz/60MHz
● High-accuracy, broad-band 6 bit frequency counter, range: 100mHz~100MHz
● Two equivalent-performance channels
● 4.3 inches TFT LCD
Weight | 0.4 kg |
---|---|
Dimensions | 17 × 9 × 7 cm |
Based on 0 reviews
Be the first to review “UTG932E Function/Arbitrary Waveform Generator”
-
Multimeters
UT 133A Digital Multimeter
Specifications Range UT133A DC voltage (V) 600mV/6000mV/60V/600V ±(0.5%+3) AC voltage (V) 600V ±(0.7%+3) DC current (A) 600uA/60mA/600mA/10A ±(1%+3) AC current (A) 10A ±(1.2%+3) Resistance (Ω) 600Ω/6000Ω/60kΩ/600kΩ/60MΩ ±(0.8%+2) Capacitance (F) 9.999nF/99.99nF/999.9nF/9.999μF/99.99μF/999.9μF/9.999mF ±(4%+5) Frequency (Hz) 10.00Hz~1.000MHz ±(0.1%+5) Temperature (℃) ‒40℃~1000℃ ±(1%+4) Temperature (℉) ‒40℉~1832℉ ±(1.5%+5) Features Display count 6000 Range selection Auto Diode √ Continuity buzzer √ NCV √ LCD backlight √ Test probe holder √ Data hold √ Low battery indication √ Overload indication √ General Characteristics Power 1.5V battery (R03) x 2 Display 56.8mm x 36.1mm Product color Red and grey Product net weight 255g (with batteries) Product size 155mm x 76.5mm x 49mm Standard accessories Manual, test leads, K-type thermocouple SKU: n/a -
Optical Multimeter
UT 695D-10 Optical Multimeter
Specifications Model Description Optical power meter Wavelength range 800nm~1700nm Calibrated wavelength 850nm, 980nm, 1300nm, 1310nm, 1490nm, 1550nm, 1625nm, 1650nm Measurement range -70~3dBm Uncertainty ±5% Display resolution Linear: 0.1%, logarithmic: 0.01dBm Connector FC/SC/ST Detector type InGaAs Visual fault locator Wavelength 650nm±10nm Power 10mW (measurable optical fiber length: approximately 8~10km) Mode Continuous/Pulse Connector FC/SC/ST Flashlight √ LAN cable sequence test Line sequence measurement (LED1~8, LED_G) General Characteristics Power 1050mAh rechargeable battery Display 42mm x 33mm Product color Red and grey Product net weight 168g Product size 132mm x 68mm x 31mm Standard accessories USB cable Standard individual packing Gift box, English manual Standard quantity per carton 10pcs Standard carton measurement 305mm x 270mm x 130mm Standard carton gross weight About 2.7kg SKU: n/a -
Wire & Cable Testers
UT18D Voltage and Continuity Tester
1. Auto power off, the conductor to be measured is greater than 12V
2. Phase rotation test3. Continuity test with buzzer and LED indication4. Low battery indication and over voltage prompt5. Flashlight6. Test live voltage without batteries7. Buzzer and silent modes available8. Auto range9. Polarity indicationSKU: n/a
There are no reviews yet.