-
×
UTi165A+ Heavy Duty Thermal Camera
- Vendor:
superworld
Subtotal: ₨120,000
-28%
DC Power Supplies
YIHUA 303D DC Power Supply
Feature
303D communication maintenance power supply is a single line output of stabilized high accuracy
DC stabilized power supply. The output voltage and current can be adjusted continuously within the
rated range. The load current has MA conversion with two settings: 0-3A and 0-99 mA. Constant
voltage and constant current (CV/CC), automatic switching of working modes. Double digital display
shows output voltage and current independently. Several protection functions include current
limitation, voltage reduction, short circuit protection, over-temperature protection, etc. The design
is applied to production line of the plant, maintenance, laboratories and is also a necessary device
for the communication industry.
₨7,586 ₨10,529
Principle description of constant voltage/constant current CV/CC
The operation mode of constant voltage/constant current can be automatically switched depending
on the comparison result of the load current and limited current value.
- a) Constant voltage CV
When the existing current value is smaller than the set output limit current value, the power supply
is working under the constant voltage mode. The CV indicator light on the front panel is on, the
output voltage is controlled and it will be the same as the set value. Current changes with the load.
- b) Constant current mode (CC)
When the current value exceeds the limit value of the output current, the equipment will work in
the CC mode. The CC indicator light on the front panel is on, the output current value is controlled
to the set value. Since the limited output power cannot be overloaded, the output voltage can be
lower than the set value. When the output current is lower than the set value, the equipment will
automatically change to CC mode.
| Weight | 4 kg |
|---|---|
| Dimensions | 25 × 13 × 15 cm |
Machine parameters
| Parameters | |
| rated voltage | AC220V 50Hz |
| Power of complete machine | 140W |
| Operating environment | 0～40℃ relative humidity ＜80％ |
| Storage Temperature | －20～80℃ relative humidity ＜80％ |
| Dimensions of the machine body | 255*130*150mm |
| weight | 4.3KG |
| Performance parameters | |
| output voltage | Adjustable continuously within 0～30V |
| output current | Adjustable continuously within 0～3A/0-99mA
(current limitation adjustment when above 0.2A) |
| output power | 90W |
| Source effect | 1mV |
| load effect | ≤0.33% |
| Ripple noise | ≤3mVrms（5Hz ~ 1MHz）/≤3mArms |
| Display accuracy | 0.1V/0.1A/1mA |
| Protection mode | Over current, short circuit, over temperature protection |
| Dissipation mode | air cooling |
Brand
YIHUA
Based on 0 reviews
Be the first to review “YIHUA 303D DC Power Supply”
-
Clamp Meters
CLAMP METER AC DC ET 8203
Descriptions:
1.This is a 5999 counts automatic digital clamp multimeter,small and compact design for easy carrying.
2.Stable performance,high precision,high reliability,clear reading and overload protection.
3.It is a ideal tool and instrument,laboratory,factory,radio enthusiasts and The ideal tool for the family.Specifications:
Brand:WINAPEX
Model: 8203
Color:Black
Jaw:40mm
Maximum display:5999
DC Voltage: 6V/60V/600V/1000V
AC Voltage: 6V/60V/600V/750V
AC Current: 60A/600A
DC Current: 60A/600A
Resistance(ohm):600Ω/6KΩ/60Ω/600KΩ/6MΩ/40MΩ
Capacitance:60nF/600nF/6uF/60uF/600uF/6mF/30mF
Frequency:10Hz/100Hz/1kHz/10Hz/100Hz/1MHz/10MHz
Temperature:(-20-1000 )℃/(0-1832 )℉
DC voltage DCV :yes
AC voltage ACV :yes
AC current ACA :yes
DC current DCA :yes
T-RMS:yes
NCV:yes
Square wave output:yes
On-Off Test :yes
Diode measurement:yes
Buzzer:yes
Zero line / Fire line test :yes
Data hold:yes
Material: Plastic, Electronic Parts
Battery: 2 x 1.5V AAA Batteries (not included)
Product size:176x67x33mm/6.86×2.61×1.29in
Product weight:305g/10.68ozPackage information:
Package weight:350g/12.25oz
Package size:210x80x35mm/8.19×3.12×1.37in
General Box PackagePackage included:
1 x Clamp Meter
1 x Pair of test leads
1 x Thermocouple
1 x User ManualNoted:
1.Cannot measure,there is no current through the ground wire,can only be measured as a single wire or zero Iine.
2.Cannot measure two or more lines at the same time.
3.A line contains two or more than two wire core can not be measured.SKU: n/a -
Laser Distance Meters
LM80 Laser Distance Meter
1. Ergonomic exterior, comfortable handling
2. Millimeter accuracy3. Large, multiple angle HD display5. Physical and electronics leveler6. Multiple functions: Max/Min/continuous measurement, displacement calculation, data storage, and more7. Auto power off after 3 minutes without operationSKU: n/a -
Tool Kits
JM-6108 Ratchet Screwdriver Bits Set
Features:
- Ratchet screwdrivers with twist reverse and ratchet lock mechanism.
- Contoured comfort grip handle. Supplied in storage case.
- 180 degrees angle ratchet screwdriver.
- Forward & Reverse with locking action.
- Adjustable screwdriver bits for different screws.
- Common used in automotive parts and home appliances.
SKU: n/a
Related products
-
-
DC Power Supplies
YH 1502DD DC POWER SUPPLY
Parameters
Rated voltage AC220V±10% 50Hz Power of complete machine 15W Operating environment 0～40℃ relative humidity＜80％ Storage temperature －20～80℃ relative humidity＜80％ Dimensions of the machine body 17*21*16.5cm Weight 1.61KG Performance parameters Output voltage Adjustable continuously within 0～15V Output current Adjustable continuously within 0～1A (current limitation adjustment when above 0.2A) Output power 15W Source effect ≤1mV Load effect ≤0.33% Ripple noise ≤3mVrms（5Hz ~ 1MHz）/≤3mArms Display accuracy 0.1V/0.1A/1mA Protection mode Over-current, short circuit, over-temperature protection SKU: n/a -
DC Power Supplies
YH 1502D+ DC POWER SUPPLY
Parameters
Rated voltage AC220V±10% 50Hz Operating environment 0～40℃ relative humidity＜80％ Storage temperature －20～80℃ relative humidity＜80％ Dimensions of the machine body 27*14*22cm Weight 1.9KG Performance parameters Output voltage Adjustable continuously within 0～15V Output current Adjustable continuously within 0～2A (current limitation adjustment when above 0.2A) Output power 15W Source effect ≤1mV Load effect ≤0.33% Ripple noise ≤3mVrms（5Hz ~ 1MHz）/≤3mArms Display accuracy 0.1V/0.1A/1mA Protection mode Over-current, short circuit, over-temperature protection Dissipation mode Air cooling SKU: n/a
There are no reviews yet.