7 in stock
₨5,000 ₨7,000
7 in stock
CompareThe BT-100D 100+ Amp Digital Battery Load Tester is microprocessor controlled. It makes for an easy and accurate load test with no need to time yourself to get accurate results. Bright, LED Digital Display indicates both voltage and test results. A unique 3-Step Design provides LED polarity check function, battery load test and charging system test readout. Automatically Turns Off the Load after 10 seconds and locks the voltage. Super-Grip Battery Clamps are heavy-duty and color-coded. Baked Enamel, Steel Case to keep cool. Rubber Insulated Carrying Handle–for comfort and safety. Checks both Battery and Charging System.
| Weight | 0.7 kg |
|---|---|
| Dimensions | 15 × 8 × 6 cm |
12 Volt Battery Analysis
Press “START TEST” & wait for 10 seconds.
Once automatic test cycle is completed, your test results will be:
1. GREEN LIGHT = OK):
Battery capacity is good. May or may not be fully charged.
Determine state of charge by checking specific gravity (use hydrometer). If gravity is less than full charge, check for possible charging system trouble or electrical drain. Recharge battery to fully charged level.
2. GREEN + YELLOW LIGHT = OK BUT WEAK):
Review the load test result with the comparison chart on the tester cover to see if this battery is “OK” or not. If it is “OK”, go up to 1ST “OK” state. If it is not, go down to 3rd “WEAK” state.
3. YELLOW LIGHT = WEAK):
Battery capacity is unsatisfactory. Battery may be either: (1) defective or (2) partially discharged. To determine which, check specific gravity. If gravity is over 1.225, battery is considered defective. If gravity is under 1.225, recharge battery and re-test. If cell-to-cell gravity varies more than 0.025 (25 points), cell trouble may exist. If charging does not bring gravity to fully charged level, the battery is either sulfated or has lost active material.
4. RED LIGHT = BAD):
Battery may be defective (e.g. a bad cell).
NOTE: If pre-test battery voltage is below 12.3V, tester will not allow and should not perform the load test. Please fully charge battery and retest.
| Specifications | |
| Model | UTi320V |
| Temperature range | -20~350℃ |
| -4℉~662℉ | |
| Temperature accuracy | ±2℃ or ±2% (whichever is greater) |
| Temperature resolution | 0.1℃/0.18℉ |
| Thermal resolution | 320×240 |
| Temperature coefficient | ± 0.1/℃ or ± 0.1%/℃ (whichever is greater) |
| Visible light resolution | 640×480 |
| Emissivity | Adjustable (0.01-1.00), 0.98 in default |
| Reflectivity | Reflectivity correction (adjustable background temperature) |
| Palettes | White hot, iron red, arctic, rainbow 2, hot iron, rainbow 1 |
| High/low temperature tracking | √ |
| High/low temperature alarm | √ |
| Image blending/Picture in picture | √ |
| WIFI mode | Connects to PC software and moblie phone App |
| Lens | 7mm |
| Focus | Focus free |
| FOV | 42.5°×32.5° |
| NETD | ≤60mK |
| Image frequency | 50Hz |
| Digital zoom | ×2, ×4 |
| General Characteristics | |
| Power | 7.4V 2300mAh Li-ion battery |
| Display | 3.5-inches TFT LCD |
| Product color | Red and grey |
| Product net weight | 1.8kg (Package) |
| Product size | 258mm x 98mm x 90mm |
| Standard accessories | Li-on battery x 2, USB power supply with multi plugs, wrist strap, adaptor×5, SD card, USB cable, PC software CD |
| Standard individual packing | Gift box, tool box, English manual |
| Standard quantity per carton | 1pcs |
| Standard carton measurement | 410mm x 265mm x 180mm |
| Standard carton gross weight | 2.2kg |
Features of UT675A Battery Testers
Certifications: CE, UKCA, FCC
● 12V cranking lead acid battery test
Features of UT673A Battery Testers
Certifications: CE, UKCA, FCC
● 12V cranking lead acid battery test
| Model | UT3513 |
| Resistance range | 20m Q/200m Q/2Q/20Q /200 Q/2kQ/20kQ |
| Resolution | 1 u Q/10 u Q/100 u Q/lmO/lOmQ/lOOmQ/1 Q/10Q/100Q |
| Test current | 1A/1A/100mA/10mA/1mA/1mA/100 uA/10 u A/l uA |
| Testing terminal opencircuit voltage | ＜1V/＜1V/＜1V/＜1V/＜5V/＜5V/＜5V/＜5V/＜3V/ |
| Measured parameter | DC resistance |
| Basic accuracy | Slow: 0. 1%; Medium: 0. 2% |
| Maximum reading | 22000 |
| Range mode | Auto/Manual/nominal |
| Calibration | Short-circuit full range zeroing |
| Sorting function | 3types of resistance and voltage input: exceeds upper limit/exceeds lower limit/within the range,2 types of sorting result output: PASS/FAIL |
| Comparing method | Absolute tolerance, percentage tolerance, direct-reading comparison |
| Trigger mode | Internal, external |
| Test terminal | Four-terminal measurement |
| Button functions | Lock 一一 keyboard lock, OK 一一 screenshot |
| System setup | Language: Chinese/English, key tone setting |
| Interfaces & protocols | Handler interface, RS232, USB DEVICE and USB HOST communication interface,SCPI and Modbus protocol |
| Upper computer software | V |
| Power | AC 100~240V 50/60Hz |
| Display | 4.3-inches LCD |
LM 320A Angle Meters 
SOLDERING IRON SW 830L 
[HOT]JM-8189B 
A25F PM2.5 Meter 
YH 948DQ-I 
SVC 1000VA 
There are no reviews yet.