- 1.Industrial electricity
- 2.Residential electricity
- 3.Air conditioning
- 4.Automobile
Digital Clamp Meter UT202+ UNI-T
4 in stock
Specifications | Range | UT202+ |
AC current (A) | 400A | ±(2%+10) |
600A | ||
AC current frequency (Hz) | 50Hz~100Hz | ±(1%+5) |
AC voltage (V) | 600V | ±(0.8%+5) |
AC voltage frequency(Hz) | 10Hz~10kHz | ±(1%+5) |
10Hz~60kHz | ||
Resistance (Ω) | 40MΩ | ±(0.8%+2) |
60MΩ | ||
Capacitance (F) | 4mF | ±(4%+5) |
40mF | ||
60mF | ||
Temperature (℃) | -40℃~1000℃ | ±(1.5%+5) |
Frequency (Hz) | 10Hz~10MHz | |
Features | ||
Display count | 4000 | |
Auto range | √ | |
Jaw opening | 28mm | |
True RMS | √ | |
NCV | √ | |
Live wire test | ||
Continuity test | √ | |
Diode | √ | |
MAX/MIN | √ | |
Relative mode | √ | |
Zero mode | ||
Data hold | √ | |
Low battery indication | √ | |
Auto power off | √ | |
General Characterisitics | ||
Power | 1.5V battery (R03) x 2 | |
Display | 37mm x 25mm | |
Product color | Red and grey | |
Product net weight | 248g | |
Product size | 215mm x 63mm x 36mm | |
Standard accessories | Batteries, test leads, Themocouple | |
Standard individual packing | Gift box, Carring bag, English manual | |
Standard quantity per carton | 40pcs | |
Standard carton measurement | 485mm x 295mm x 385mm | |
Standard carton gross weight | 17.8kg |
₨5,820 ₨5,945
4 in stock
CompareWeight | 0.3 kg |
---|---|
Dimensions | 21 × 6 × 4 cm |
Based on 0 reviews
Be the first to review “Digital Clamp Meter UT202+ UNI-T”
-
Wire & Cable Testers
UT681L Cable Tester
Main Features
1. Tests Ethernet cables and telephone lines
2. Equipped with RJ45 interface for Ethernet cable and RJ11 interface for telephone line testing
3. Ethernet cables: Shielded/Unshielded test
4. Visible LED indication
5. Automatically check circuit breakage, short circuit and cross circuit
6. Can toggle between fast and slow speed test modes
7. Single key operation
8. Manual/auto power off (after 10-minute inactivity)
9. Low battery indication
10. Power supplied by 9V layer-built battery
SKU: n/a -
Multimeters
UT61C Modern Digital Multimeters
Product Features
1. Analogue bar graph
2. Diode test and buzzer continuity
3. Auto range
4. MAX/MIN/REL measurement mode
5. Overload protection for all ranges
6. Data hold
7. LCD backlight
8. Equipped with RS232C and USB standard interface
9. Complies with CE (European Union) directives
SKU: n/a -
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
There are no reviews yet.