-7%

YIHUA 605D DC Power Supply


YH-605D communication maintenance power supply

605D communication maintenance power supply is a single line output of stabilized high accuracy

DC stabilized power supply. The output voltage and current can be adjusted continuously within

the rated range. Double digital display shows output voltage and current independently. Several

protection functions include current limitation, voltage reduction, short circuit protection, over-

temperature protection, etc.

The design is applied to production line of the plant, maintenance, laboratories and is also

a necessary device for the communication industry.

22,000 23,710

Compare

Principle description of constant voltage/constant current CV/CC

 

The operation mode of constant voltage/constant current can be automatically switched depending

on the comparison result of the load current and limited current value.

  1. a) Constant voltage CV

When the existing current value is smaller than the set output limit current value, the power supply

is working under the constant voltage mode. The CV indicator light on the front panel is on, the output

voltage is controlled and it will be the same as the set value. Current changes with the load.

  1. b) Constant current mode (CC)

When the current value exceeds the limit value of the output current, the equipment will work in the

 CC mode. The CC indicator light on the front panel is on, the output current value is controlled to

the set value. Since the limited output power cannot be overloaded, the output voltage can be lower

 than the set value. When the output current is lower than the set value, the equipment will

automatically change to CC mode.

Category:
Weight 5.9 kg
Dimensions 25 × 13 × 15 cm

Product parameters

Machine parameters
rated voltage AC220V  50Hz
Power of complete machine 380W
Operating environment 0~40℃  relative humidity <80%
Storage Temperature -20~80℃  relative humidity <80%
Dimensions 255*130*150mm
weight 6.1KG
Specifications
output voltage Adjustable continuously within 0~60V
output current Adjustable continuously within 0~5A

(current limitation adjustment when above 0.2A)

output power 300W
Source effect 1mV
load effect ≤0.33%
Ripple noise ≤3mVrms(5Hz ~ 1MHz)/≤3mArms
Display accuracy 0.1V/0.1A/1mA
Protection mode Over-current, short circuit, over-temperature protection
Dissipation mode air cooling

Brand

YIHUA

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “YIHUA 605D DC Power Supply”

There are no reviews yet.

  • UT333S Digital Temperature Humidity Meter

    0 out of 5
    (0)

    1. Precise temperature and humidity sensor

    2. Split type design with extendable spring cable for convenient measurement
    3. LCD screen
    4. Sampling time: 1s
    SKU: n/a
  • TITAN 1502 DS Power Supply

    0 out of 5
    (0)

    1502DS Adjustable Digital DC Regulator Power Supply12V2.0A:Output Voltage:15VDC Output current:2A input voltage: AC220+10% Output power:30(W) frequency range:50

    SKU: n/a
  • LKZ-720 Wires and pipe locator

    0 out of 5
    (0)

    Features:

    • the function 3D in the receiver – detecting the direction of current flow and accurate locating the object,
    • phase detection mode,
    • receiver operation with four transmitters at the same time to locate interruptions or distinguish wires,
    • a LED bright torch,
    • headphone socket in receiver,
    • screens backlight for work in dark,
    • transmission battery status and settings of the transmitter to the receiver
    • operation in wide range of rated voltage, up to 500V RMS,
    •  measurement of voltage at the object to 500 Vrms,
    • three levels of transmitter amplification,
    • automatic or manual selection of transmitter operation modes,
    • five modes of wire tracer operation – voltage, current, current-voltage, power and clamp,
    • software upgrade via USB,
    • additional accessories enable precise localization – such as contact or non-contact probes and measurement clamp.
    SKU: n/a
  • Digital Storage Oscilloscope UTD2202CM

    0 out of 5
    (0)

    Specifications and features:

    1. 2 channels,1GS/s sample rate

    2. 200MHzbandwidth, 16Mpts maximum memory depth

    3. Waveformacquisition rate is up to 150,000wfms/s

    4. Verticalsensitivity: 2mV/div~5V/div

    5. Time-basedrange: 2ns/div~50s/div

    6. Trigger modes:edge, pluse, runt, video, slope, alternate

    7. Customized AUTO,fast captures the signals

    9. Supports Y-T andX-Y mode at the same time, can observe Lissajous waveform

    10. 34 kinds ofauto measurements

    11. Optional LAmodule

    12. Standardinterfaces: USB Host,USBDevice,Pass/Fail

    13. 7-inch TFT LCD,WVGA (800*480)

    SKU: n/a