-24%

JM-6115 T-Type Labor-Saving And Quick Ratchet Screwdriver Set

Availability:

Out of stock


ing long nose pliers

Features:

Forward&Reverse with locking action.
T-shaped ratchet screwdriver.
Adjustable screwdriver bits for different screws.
Common uesd in automotive parts and home appliances.
20PCS 40*28mm bright chromium pated bits:

  • Slotted: 1.5 2.0 2.5
  • Phillips: 1.0 1.5 2.0 2.5 3.0
  • Torx: T4 T5 T6 T7 T8
  • Hex: H0.9 H1.3 H1.5 H2.0
  • Triangle: 2.3
  • U-shaped: U2.6

2,499 3,291

Out of stock

Compare

JAKEMY JM-6115 60 in 1 Precision household diy repair tool cr-v ratchet socket screwdriver set

Category:
Weight 0.7 kg
Dimensions 12 × 8 × 4 cm

Specifications:

9PCS inner hexagon sockets:

  • M5.0 M6.0 M7.0 M8.0 M9.0 M10 M11 M12 M13

24PCS 6.3*25MM bright chromium plated:

  • Slotted: 3.0 4.0 5.0 6.0 7.0
  • Phillips: 4.0 5.0 6.5
  • Torx: T9 T10 T15 T20 25 T30
  • Hex: H2.5 H3.0 H4.0 H5.0 H6.0
  • Tri-wing: Y2 Y3
  • Pozi: Pz2 Pz3
  • U-shaped: U6

1PC H4*120mm adjustable extension bar

1PC H6*150mm adjustable extension bar

1PC T-type ratchet handle

1PC H4 non-slip soft handle

1PC 5″inch nickel plat

Brand

JAKEMY TOOLS

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “JM-6115 T-Type Labor-Saving And Quick Ratchet Screwdriver Set”

There are no reviews yet.

  • TDR-420 Time Domain Reflectometer/ Cable Fault Locator

    0 out of 5
    (0)

    Product features

    • Possibility damage-free location of impedance changes of tested cables and wires such as:
      • shorted conductor,
      • open conductor / end of cable – useful during the inventory of warehouses and stores,
      • splice,
      • splitter,
      • water ingress,
      • wet splice,
      • bridge tap
      • or other changes.
    • Single measurement mode ONCE,
    • Continuously measurement mode CONT,
    • Tone signal generator TONE,
    • Two cursors to mark two places of damage along with an indication of the distance between them,
    • Built-in HELP function for easier interpretation of the reflectogram,
    • 11 available measuring ranges from 7 m to 6000 m,
    • „dead zone” limited to 0.6 m,
    • Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
    • manually set of sensitivity in 8 steps GAIN,
    • output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
    • Velocity of Propagation set in range from 10% to 99%,
    • tight and durable housing with IP67 ingress protection degree.
    • Small size and weight.
    SKU: n/a
  • UTP05 VELLEMAN

    0 out of 5
    (0)
    VELLEMAN
    LAN wiring
    LCD
    broken wires,   shorted wires,   swapped wires
    5V
    2.5mA
    103x70x20mm
    wiring RJ45
    SKU: n/a
  • JM CT-2-2 5″ CUTTER

    0 out of 5
    (0)
    SKU: n/a
  • UT262A Non-Contact Phase Detector

    0 out of 5
    (0)

    UT262 series adopts clamp type non-contact measuring method, which means user doesn’t need to get in touch with high-voltage exposed wires. It can start detection after three super-induction and high-insulation clamps clamp the exterior of the three-phase wires, which is safer, more practical, and more effective. Beside phase sequence detection, UT262 series can be also used for live wire detection, simple electrical inspection, phase identification, missing-phase judgment, and wire breaker searching. It is a perfect tool for phase sequence detection, motor mounting, and wires maintenance.

    SKU: 22000
  • ,

    UT261B Phase Sequence and Motor Rotation Indicator

    0 out of 5
    (0)

    UT261 series is used for determining 3-phase power phase sequence, missing phase indication, and motor phase  rotation (UT261B). UT261A and UT261B can measure AC voltage of 40~700V and 90~600V respectively.  These devices can operate in frequency range of 15~400Hz. UT261 are durable devices which can withstand impact from 2 meter’ s height. Test leads with protective tubing are included in optional accessories.

    SKU: n/a
  • TDGC 5000VA

    0 out of 5
    (0)

    Input Voltage=220V/230V
    Output Voltage=0-250V
    Maximum Output Current=20
    Copper Wind
    LCD Output Display

    SKU: n/a