UT58C General Digital Multimeter
20 in stock
1. 2000 display count, refresh rate 2~3 times/s
₨8,400 ₨8,711
20 in stock
CompareWeight | 0.4 kg |
---|---|
Dimensions | 18 × 9 × 4 cm |
Specifications | Range | UT58C |
DC voltage (V) | 200mV/2V/20V/200V/1000V | ±(0.5%+1) |
AC voltage (V) | 2V/20V/200V/750V | ±(0.8%+3) |
DC current (A) | 2mA/200mA/20A | ±(0.8%+1) |
AC current (A) | 2mA/200mA/20A | ±(1%+3) |
Resistance (Ω) | 200Ω/2kΩ/20kΩ/2MΩ/20MΩ | ±(0.8%+1) |
Capacitance (F) | 2nF/200nF/100μF | ±(4%+3) |
Frequency (Hz) | 2kHz/20kHz | ±(1.5%+5) |
Temperature (°C) | -40°C~1000°C | ±(1%+3) |
General Characteristics | ||
Power | 9V battery (6F22) | |
Display | 60mm x 54mm | |
Product color | Red and grey | |
Product net weight | 350g | |
Product size | 179mm x 88mm x 39mm | |
Standard accessories | Battery, test leads, holster, multi-purpose socket, point contact temperature probe | |
Standard individual packing | Gift box, English manual | |
Standard quantity per carton | 20pcs | |
Standard carton measurement | 450mm x 330mm x 340mm (0.11CBM per standard carton) | |
Standard carton gross weight | 12kg |
Based on 0 reviews
Be the first to review “UT58C General Digital Multimeter”
-
Oscilloscopes
UPO2104CS 4 Channels Ultra Phosphor Oscilloscope
Features and Benefits:
1、Sample Rate up to 1GS/s;
2、Channels 4;
3、Bandwidth 100MHz,;
4、Memory Depth 28Mpts (Standard);
5、Waveform Capture Rate up to 50,000wfms/s;
6、With 256 level intensity grading display;
7、Up to 65,000 frames for Waveform Record ,Replay;
8、Support serial bus trigger and decoding;
9、8 inches, TFT LCD,WVGA(800*480);
10、Interface:USB Host, USB Device, LAN, VGA, AUX OUT, 10MHz input/output.SKU: UP21O02CSMHZ -
-
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
There are no reviews yet.