-
×
UT505B Handheld Insulation Resistance Tester
- Vendor:
superworld
Subtotal: ₨64,800
-26%
Oscilloscopes
Hantek HT6022BE20Mhz 6022be PC Based USB Digital Storage Oscilloscope, 20 MHz Bandwidth
Hantek HT6022BE20Mhz 6022be PC Based USB Digital Storage Oscilloscope, 20 MHz Bandwidth
₨17,000 ₨23,000
Hantek HT6022BE20Mhz 6022be PC Based USB Digital Storage Oscilloscope, 20 MHz Bandwidth
Brand
China Brand
Based on 0 reviews
Be the first to review “Hantek HT6022BE20Mhz 6022be PC Based USB Digital Storage Oscilloscope, 20 MHz Bandwidth”
-
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
Multimeters
ET 8102 DMM
Specifications:
Model:ET8102
Display:5999 Counts
Color:Black
DC Voltage:6V/60V/600V±(0.5%+3),1000V±(0.8%+10)
AC Voltage:6V/60V/600V±(0.8%+3),750V±(1.2%+10)
DC Current:600uA/6000uA/60mA/600mA±(1.2%+10),6A/10A±(2.0%+30)
AC Current:600uA/6000uA/60mA/600mA±(1.2%+10),6A/10A±(2.0%+30)
Resistance:600Ω±(0.8%+5),6KΩ/60KΩ/600KΩ/6MΩ±(0.8%+3),40MΩ±(2.5%+3)
Capacitance:60nF/600nF/6μF/60μF/600μF±(3.5%+20),6mF/30mF±(5.0%+3)
Frequency:10Hz/100Hz/1kHz/10kHz/100kHz/1MHz/10MHz±(0.1%+3)
Temperature:-20℃～1000℃,±(1.0%+5)<400℃,±(1.5%+15)≥400℃
0℉~1832℉,±(0.75%+5)<750℉,±(1.5%+15)≥750℃
NCV test:Yes
Zero line/fire wire:Yes
Duty cycle:Yes
Diode test:Yes
Continuity testing:Yes
Backlight:Yes
Date hold:Yes
True RMS:Yes
Max/Min value measurement:Yes
Flashlight:Yes
Auto power off:Yes
Low battery indication:Yes
Over range indication:Yes
Power:2 x 1.5V AAA Battery (not included)
Product Size:142 x 68 x 32 mm
Product Net Weight:187gPackage Information:
Package Size:16.5 x 10 x 5cm / 6.5 x 3.9 x 2in
Package Weight:295g / 10.4 ozPackage list:
1 x Digital Multimeter
2 x Test Leads Pens
1 x User Manual
• 1.Multifunction:Can measure AC/DC voltage,AC/DC current,resistance,capacitance,
• 2.Portable design:Small and can be put into pocket,easy to carry.
• 3.Wide range of applications:It’s a perfect tool for the laboratory,factory and home.
• 4.Easy to use & clear to read:With large LCD backlight display and flashlight function,convenient to read data in dark.
• frequency,duty cycle,temperature,NCV,diode,continuity,zero line/fire wire.SKU: n/a -
DC Power Supplies
TITAN TN 305DS DC Power Supply
Operating Conditions
Supply power: AC 220-240V, 50Hz/60Hz.
Working Temperature: -10°C ~ 40 °C
Relative Humidity: ‹ 90%
Storage Conditions: -10°C ~ 40 °C
Relative Humidity: ‹ 80%
Stable Voltage
The output voltage is between 0 and nominal value continuously adjustable
Voltage Stability: ≤0.01% +2mV
Load Stability: ≤ 0.01% +2mV
Recovery Time: ≤100µS
Temperature Coefficient: ≤ 200PPM/°C
Ripple Noise: ≤1 MVRMS(RMS)
Stable CurrentPower Stability: 0.1% + 3mA
Load Stability: 0.2% + 3mA
Ripple Noise : ≤2mArms(RMS)
The output current is between 0 and nominal value continuously adjustable
SKU: n/a
Related products
-
Oscilloscopes
UTD2052CL Digital Storage Oscilloscope
1. Dual analog channels width range 1mV/div~20V/div;
2. 7 inches widescreen LCD displays;
3. Special Print Scree Feature;
4. Supports plug-and-play USB storage device. Communication with and remote control of computer through the USB device;
5. USB drive system software upgrade;
6. Storage of waveforms setups and interfaces waveforms and setups reproduction;
7. Automatic measurement of 28 waveform parameters;
8. Unique waveform recording and replay function;
9. Multilingual menu displays.
SKU: n/a -
Oscilloscopes
UTD2072CEX-II Digital Storage Oscilloscope
1. 2 channels
2. 70MHz/100MHz bandwidth; 1GSa/s real-time sampling rate3. Up to 28Mpts memory depth4. Calibration signal output: 10Hz, 100Hz, 1kHz (by default),10kHz or 100kHz5. Max 10Mpts waveform record6. 8-inch TFT LCD, WVGA (800X480)SKU: n/a
There are no reviews yet.