-9%

UNI-T 2 Channel UPO2102E Ultra Phosphor Oscilloscope


  • 100MHz bandwidth
  • number of channels 2
  • sampling 1GS / s
  • max memory depth 56Mpts (per channel) (previously 28Mpts per channel)
  • waveforms per second up to 80,000 wfms/s (formerly 50,000 wfms/s)
  • time base range 5ns/div – 50s/div
  • input coupling (1MΩ ± 2%) // (20pF ± 3pF)
  • verical axis 1mV/div – 20V/div (1MΩ)
  • DC gain accuracy ± 3%
  • number of saved waveforms 65000
  • trigger : Edge, Window, Runt, Time Out, Nth Edge, Delay, Duration, Setup / Hold, Pulse Width, Slope, Video, Pattern, RS232 / UART, I2C, SPI
  • mathematical operations with waveforms : A + B, A-B, AxB, A / B, FFT, Logic operation, Editable Advanced, Filter
  • automatic Measurement : Max, Min, High, Low, Middle, Pk-Pk, Ample, Mean, Cycle Mean, RMS, Cycle RMS, Cycle Area, OverShoot, PreShoot, Period, Freq, Rise, Fall, + Width, -Width, + Duty, -Duty, RiseDelay, FallDelay, Phase, FRR, FRF, FFR, FFF, LRF, LRR, LFR, LFF
  • number of measurements : 5 simultaneous measurements
  • statistics : Mean, Max, Min, standard deviation, number of measurements
  • frequency counter : 6 bits
  • standard interfaces : USB-Host, USB-Device, LAN, AUX (Trig Out, Pass / Fail)

154,800 170,610

Compare

UNI-T 2 Channel UPO2102E Ultra Phosphor Oscilloscope

The UPO2102E oscilloscope is a digital oscilloscope with Ultra Phosphor technology from the UPO2000E series. The UPO2102E oscilloscope offers 2 channels with the same characteristics. It is also equipped with sampling rate of 1 GS/s. This is amply sufficient for a bandwidth that is 100 MHz (unlike the lower versions of UPO2072CS, UPO2074CS, UPO2072E and UPO2074E, which are only up to 70 MHz). It is a multifunctional, high-performance oscilloscope that is easy to use, with very good technical specifications. It features a 800 x 480 pixel display. Supports USB storage and PC communication via Plug and play USB. Compared to the previous version UPO2102CS differs in new software (firmware).

Category:

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UNI-T 2 Channel UPO2102E Ultra Phosphor Oscilloscope”

There are no reviews yet.

  • MRU-21 Earth Resistance Meter

    0 out of 5
    (0)

    Possible measurements:

    • earth resistance measurment with 3-pole method,
    • measurement of continuity of equipotential bondings and protective conductors with auto-zero function – with current 200 mA,
    • resistance measurement using 2-pole method.
    SKU: n/a
  • UT251A

    0 out of 5
    (0)
    1. 4-digit LCD digital display, 10000 display count

    2. Auto range, 2/s sampling rate
    3. Peaks hold
    4. Store 99 sets of data
    5. RS-232 interface
    6. Data hold
    7. Auto power off
    8. Overload indication, low battery indication
    SKU: n/a
  • Battery Load Tester – BT 100D

    0 out of 5
    (0)
    • 100 Amp Digital Battery Load Tester
    • Microprocessor Control–makes for an easy and accurate load test with no need to time yourself
    • Bright, LED Digital Display–indicates both voltage and test results
    • Unique 3-Step Design–LED polarity check function, battery load test and charging system test readout
    • Super-Grip Battery Clamps–heavy-duty and color-coded
    • Baked Enamel, Steel Case–ventilated to keep cool
    • Rubber Insulated Carrying Handle–for comfort and safety
    • Checks both Battery and Charging System
    SKU: n/a
  • UT107 Handheld Automotive Multi-Purpose Meters

    0 out of 5
    (0)

    Main Features

    1. Dwell angle measurement (DWELL)

    2. Tach measurement (RPM)

    3. Data hold

    4.12V battery test, duty ratio measurement

    5. Measurement input port prompt

    6. Low battery, auto polarity and over-range indication

    7. Complies with CE (European Union) directives

    SKU: n/a
  • TDR-410 Cable Fault Locator

    0 out of 5
    (0)
    • Features:

      • automatic or manual mode:
        • the automatic fault location (AFL),
        • mode with manual range selection and sensitivity,
        • single measurement triggered manually or scanning continuous,
      • 11 available ranges from 7 m to 4000 m selected in manual mode or matched automatically,
      • maximum length of cable up to 4000 m one end of the cable,
      • “Dead zone” measure limited to 0.5 m,
      • 2.5 “LCD screen with backlight,
      • scan automatically or manually trigger,
      • sensitivity set manually or automatically adjusted,
      • adjustable impedance matching,
      • propagation coefficient adjustment 1% to 99%,
      • waterproof and resistant to mechanical housing.
      • small size and weight.
      • economical power system – 30 hours of continuously scan on one battery set..

      Accessories:

      • 0,6 m double-wire lead: WAPRZ0X6DZBB
      • red crocodile clip: WAKRORE20K02
      • Krokodylek czarny: WAKROBL20K01
      • cover M-2: WAFUTM2
    SKU: n/a