Insulation Tester
MIC-2501,2500V Insulation Resistance Meter
Availability:
1 in stock
Electrical safety:
- type of insulation: double, in acc. with EN 61010-1 und IEC 61557
- measurement category: IV 600 V (III 1000 V) in acc. to EN 61010-1
- case protection rating in acc. with EN 60529: IP65
Other technical specifications:
- power supply of the meter SONEL L-1 NiMH 9,6 V; DC 12 V 2,5 A
- weight of the meter: approx. 0,9 kg
- dimensions: 200 x 180 x 77 mm
- display: LCD segment display
- measurement results memory: 990 cells, 11880 records,
- transmission of measurement results: USB
₨0
1 in stock
Compare- Insulation resistance measurement:
- selectable measurement voltage in the 100…2500 V range with 100 V step,
- continuous indication of insulation resistance or leakage current,
- automatic discharge of capacitance of tested object after the insulation resistance measurement,
- acoustic signalling of five-second periods to facilitate obtaining time characteristics,
- measured test times T1, T2 i T3 to measure one or two absorption coefficients in 15, 60 and 600 s,
- indication of actual test voltage during the measurement,
- protection against measuring live objects,
- two and three-lead measurement method,
- Continuity measurement of protective and equipotential conductors according to EN 61557-4
- with the >200 mA current.
- Leakage current measurement.
- Measurement of alternating and direct voltages in the 0…750 V range.
- Built-in rechargeable battery pack.
- The instruments meet the requirements of the EN 61557 standard.
- The ability to charge from car lighter (12 V) socket (additional accessories).
| Weight | 0.9 kg |
|---|---|
| Dimensions | 20 × 18 × 8 cm |
Insulation resistance measurement (two-lead)
Measurement range acc. to IEC 61557-2 for RISOmin=UISOnom/IISOmax…1 TΩ (IISOmax=1 mA)
| Range | Resolution | Accuracy |
|---|---|---|
| 0,0…999,9 kΩ | 0,1 kΩ | ±(3% m.v. + 20 digits) |
| 1,000…9,999 MΩ | 0,001 MΩ | ±(3% m.v. + 20 digits) |
| 10,00…99,99 MΩ | 0,01 MΩ | ±(3% m.v. + 20 digits) |
| 100,0…999,9 MΩ | 0,1 MΩ | ±(3% m.v. + 20 digits) |
| 1,000…9,999 GΩ | 0,001 GΩ | ±(3% m.v. + 20 digits) |
| 10,00…99,99 GΩ | 0,01 GΩ | ±(3% m.v. + 20 digits) |
| 100,0…999,9 GΩ | 0,1 GΩ | ±(3% m.v. + 20 digits) |
Values of measured resistance depending on measurement voltage
| Voltage UISO | Measurement range |
|---|---|
| 100 V | 50 GΩ |
| 200…400 V | 100 GΩ |
| 500…900 V | 250 GΩ |
| 1000…2400 V | 500 GΩ |
| 2500 V | 1000 GΩ |
Continuity measurement of protective connections and equipotential bonding with 200 mA current.
Measurement range acc. to EN 61557-4: 0,10…999 Ω
| Range | Resolution | Accuracy |
|---|---|---|
| 0,00…19,99 Ω | 0,01 Ω | ±(2% m.v. + 3 digits) |
| 20,0…199,9 Ω | 0,1 Ω | ±(2% m.v. + 3 digits) |
| 200…999 Ω | 1 Ω | ±(4% m.v. + 3 digits) |
- Voltage on open terminals: 4…24 V
- Output current at R <2 Ω: ISC >200 mA
- Compensation of test lead resistance
- Current flowing in both directions, mean value of resistance is displayed
DC and AC voltage measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 0…299,9 V | 0,1 V | ±(3% m.v. + 2 digits) |
| 300…750 V | 1 V | ±(3% m.v. + 2 digits) |
- Frequency range: 45…65 Hz
The acronym “m.v.” stands for a “measured reference value”.
Brand
SONEL
Based on 0 reviews
Be the first to review “MIC-2501,2500V Insulation Resistance Meter”
-
Tool Kits, Tools and Hardware
JM-8101 Precision Screwdriver Tool Kit
Features:
- Adjustable screwdriver bits for different screws.
- Finest CR-V bits with HRC up to 52 ℃.
- Common used in precision work in electronics, DIY models, jewelry, eye glasses and other home appliances.
- Curved tip tweezer common used in mini electronic components.
- Portable box with transparent cover.
SKU: n/a -
Laser Distance Meters
LM120C Laser Distance Meters (Discontinued)
Features of LM80C/LM120C/LM200C Laser Distance Meters
● 2.4-inch color screen
● 12 measurement modes● Electronic leveling● 3 selectable measurement references● USB 3.0 supply power● 100 groups of data storage● Rotatable screen● Camera-aided measurement● 2m drop test● IP65 dust and water proofSKU: n/a -
Wire & Cable Testers
LKZ-720 Wires and pipe locator
Features:
- the function 3D in the receiver – detecting the direction of current flow and accurate locating the object,
- phase detection mode,
- receiver operation with four transmitters at the same time to locate interruptions or distinguish wires,
- a LED bright torch,
- headphone socket in receiver,
- screens backlight for work in dark,
- transmission battery status and settings of the transmitter to the receiver
- operation in wide range of rated voltage, up to 500V RMS,
- measurement of voltage at the object to 500 Vrms,
- three levels of transmitter amplification,
- automatic or manual selection of transmitter operation modes,
- five modes of wire tracer operation – voltage, current, current-voltage, power and clamp,
- software upgrade via USB,
- additional accessories enable precise localization – such as contact or non-contact probes and measurement clamp.
SKU: n/a
Related products
-
Insulation Tester
DIGITAL INSULATION / CONTINUITY TESTER MODEL 3007A
• Bargraph to display insulation resistance.
• Displays the value of external AC voltage along with flashing symbol.
• Auto null function to automatically subtract the test lead resistance before displaying the real continuity resistance value.
• Trac-Lok mode to conserve battery life on insulation and continuity tests.
• Live circuit warning beeper.
• Releasing the test button automatically discharges the charges stored in the circuit under test.
• Backlight function to view the test results in dimly lit areas.
• 200mA continuity measuring current to IEC 61557.
• Minimum 1mA current on insulation tests to IEC 61557.SKU: n/a -
Insulation Tester
MIC-5001, 5000V Insulation Tester
Insulation resistance measurement in a compact, light-weight, low-cost design.
- Measurement to 5 TΩ
- Measuring voltage selectable from 50 V to 500 V range in 50 V steps, and from 500 V to 5000 V range in 100 V steps
- Continuous indication of insulation resistance or leakage current
- Automatic discharge of stored charge due to capacitance of tested object after the insulation resistance measurement
- Audio beeps every five seconds to alert user test is proceeding, and to get time characteristics
- Measured test times of T1, T2 and T3 for measuring Absorption Coefficient, Dielectric Absorption Ratio DAR. and Polarization Index PI
- Continuous display of test voltage during the measurement
- Protection against measuring live objects
- Two and three-lead measurement method
- Ramp Test Insulation resistance measurement
- Measurement of breakdown voltage with increments up to 1 kV / s
- Measurement of alternating and direct voltages from 0 V to 750 V
- 990 cells of memory (11880 records) to record results
- Data transfer to PC via USB cable
- Built-in rechargeable battery pack
- Meets the requirements of the EN 61557 standard
- Charge from optional car lighter (12 V) socket accessory
SKU: n/a -
There are no reviews yet.