1.2.4-inch color screen
Laser Distance Meters
LM 120PRO Laser Distance Meter
Availability:
10 in stock
Specifications | LM120PRO |
Display type | EBTN |
Display size | 2.4-inches |
Range | 120m |
Min. display unit | 0.001m |
Measurement units | m/ft/in/ft+in |
Measurement basis | Front/middle/rear |
Accuracy | ±2mm |
Laser class | 2 |
Laser type | 630~670nm, ﹤1mW |
Features | |
Single measurement | √ |
Continuous measurement | √ |
Max/Min/Area | √ |
Volume/Pythagoras | √ |
Add/Subtract/Triangle area | √ |
Auto leveling horizontal/vertical | √ |
Electronic leveler | √ |
Data storage | 20 groups |
Auto laser off | 30s without operation |
Auto power off | √ |
Auto backlight off | √ |
Battery status display | √ |
USB charging | √ |
Tripod mounting hole | √ |
General Characteristics | |
Power | 1.2V AAA recharge battery x 3 |
Product color | Red and grey |
Product net weight | 170g |
Product size | 59mm x 28mm x 137mm |
Standard accessories | Carrying bag, USB interface cab |
Standard individual packing | Gift box, English manual |
Standard quantity per carton | 20pcs |
Standard carton measurement | 390mm x 255mm x 345mm |
Standard carton gross weight | 8.3kg |
₨18,000 ₨19,893
10 in stock
Compare2.6 measurement modes
3.3 selectable measurement references
4.Electronic leveling
5.20 groups of data storage
6.IP65 dust and water proof
7.2m drop test
8.USB 3.0 supply power
Weight | 0.2 kg |
---|---|
Dimensions | 6 × 3 × 14 cm |
Based on 0 reviews
Be the first to review “LM 120PRO Laser Distance Meter”
-
Laser Level Meter
LM 571R-I Laser Level Meter
Specifications LM571R-I Display type Red Laser type 1V1H Expanded Angle H130°/V150° Laser class Class 2 Light source 10mW Laser wavelength 635nm H/V accuracy ±2mm/10m Self-leveling range 3°±1° Self-leveling time 3s Working distance (Line) 20m; >30m with detector Operating time >12h (All lasers on) Tripod mounting hole √ SKU: n/a -
Oscilloscopes
UPO 2104E Ultra Phosphor Oscilloscope
Specifications Model UPO2104E Bandwidth 100MHz Channels 4 Sampling rate 1GS/s Memory depth 56Mpts (single channel) Waveform capture rate 83,000wfms/s Time base scale (s/div) 5ns/div~50s/div Input impedance (1MΩ±2%) II (20pF±3pF) Vertical scale (V/div) 1mV/div~20V/div (1MΩ) Waveform record 65,000 Frames Trigger types Edge, pulse width, runt, window, N-edge, delay, timeout, duration, setup/hold, slope, video, code Waveform operations A+B, A-B, A×B, A/B, FFT, logic operation, advanced Auto measurements Peak-Peak, Amplitude, Maximum, Minimum, Top, Bottom, Mean, Middle, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, Overshoot, Pre shoot, Frequency, Cycle, Rise Time, Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio, Delay A->B (Rising edge), Delay A->B (Falling edge), Delay B->A (Rising edge), Delay B->A (Falling edge). Number of measurements Display 5 measurements at the same time Measurement statistics Average, Max, Min, Standard Deviation, Number of Measurements Frequency counter Hardware 6 bits counter (Channels are selectable) Standard interfaces USB-Host, USB-Device, LAN, AUX (Trig Out, Pass/Fail) General Characteristics Power 100V~240VAC, 50Hz/60Hz Display 8 inches TFT color LCD Display with WVGA (800×480) resolution Product color White and grey Product net weight 3.5kg Product size 336mm×164mm×108mm Standard accessories Probe×2/4 (1×, 10× switchable), Power cord, USB cable Standard individual packing Carton box Standard quantity per carton 2pcs Standard carton measurement 450mm×420mm×280mm Standard carton gross weight 9.7kg SKU: n/a -
Rework & Soldering Station
YH 853D 2A Rework Station All IN 1
- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
SKU: n/a -
Clamp Meters
UT202A+ Digital Clamp Meter
Specifications Range UT202A+ AC current (A) 600A ±(2%+10) AC current frequency (Hz) 50Hz~100Hz ±(1%+5) AC voltage (V) 600V ±(0.8%+5) AC voltage frequency(Hz) 10Hz~10kHz ±(1%+5) DC voltage (A) 600V ±(0.5%+2) Resistance (Ω) 60MΩ ±(0.8%+2) Capacitance (F) 60mF ±(4%+5) Frequency (Hz) 10Hz~10MHz ±(0.1%+4) Features Display count 6000 Auto range √ Jaw opening 28mm True RMS √ NCV √ Live wire test √ Continuity test √ Diode √ MAX/MIN √ Relative mode √ Data hold √ Low battery indication √ Auto power off √ General Characterisitics Power 1.5V battery (R03) x 2 Display 37mm x 25mm Product color Red and grey Product net weight 248g Product size 215mm x 63mm x 36mm Standard individual packing Gift box, Carring bag, English manual Standard quantity per carton 40pcs Standard carton measurement 485mm x 295mm x 385mm Standard carton gross weight 17.3kg SKU: n/a
There are no reviews yet.