-24%
● Sampling rate: 3 times/s
● True RMS
● Audible/visual alarm
● Capacitor charging indicator
● Ergonomic design
● Double injection molding
● Auto backlight
● Display count: 6000/20000
● AC frequency range: 45~1000Hz
● Diode/continuity test
● Auto power off/auto backlight
● Conductance 200nS
● Data hold
● Function selection: SELECT
| Weight | 0.4 kg |
|---|---|
| Dimensions | 19 × 9 × 5 cm |
Brand
UNI T
Based on 0 reviews
Be the first to review “UT 89XE Digital Multimeter”
-
DC Power Supplies
UTP1310 Switching DC Power Supply
Specifications Model UTP1310 Output voltage 0~32V Output current 0~10A Output power 320W Load regulation CV＜0.1%+5mV
CC＜0.2%+3mAPower regulation CV＜0.01%+5mV
CC＜0.2%+3mAOutput regulate resolution CV: 10mV (typical), CC: 1mA (typical) MTBF(e): ≥2000hrs Programming accuracy
(25℃±5℃)Voltage ＜0.1%+1digit Current ＜0.2%+3mA Ripple and noise
(20Hz~20MHz)Voltage ≤10mVrms Current ≤5mArms Display mode LED voltage and current dual display General Characteristics Power Input voltage: 110V AC/220V AC, 50Hz~60Hz Display EBTN LCD Product color White and grey Product size (W×H×D) 80mm x 150mm x 230mm Product net weight 2.5kg SKU: n/a -
Oscilloscopes
UPO 2104E Ultra Phosphor Oscilloscope
Specifications Model UPO2104E Bandwidth 100MHz Channels 4 Sampling rate 1GS/s Memory depth 56Mpts (single channel) Waveform capture rate 83,000wfms/s Time base scale (s/div) 5ns/div~50s/div Input impedance (1MΩ±2%) II (20pF±3pF) Vertical scale (V/div) 1mV/div~20V/div (1MΩ) Waveform record 65,000 Frames Trigger types Edge, pulse width, runt, window, N-edge, delay, timeout, duration, setup/hold, slope, video, code Waveform operations A+B, A-B, A×B, A/B, FFT, logic operation, advanced Auto measurements Peak-Peak, Amplitude, Maximum, Minimum, Top, Bottom, Mean, Middle, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, Overshoot, Pre shoot, Frequency, Cycle, Rise Time, Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio, Delay A-＞B (Rising edge), Delay A-＞B (Falling edge), Delay B-＞A (Rising edge), Delay B-＞A (Falling edge). Number of measurements Display 5 measurements at the same time Measurement statistics Average, Max, Min, Standard Deviation, Number of Measurements Frequency counter Hardware 6 bits counter (Channels are selectable) Standard interfaces USB-Host, USB-Device, LAN, AUX (Trig Out, Pass/Fail) General Characteristics Power 100V~240VAC, 50Hz/60Hz Display 8 inches TFT color LCD Display with WVGA (800×480) resolution Product color White and grey Product net weight 3.5kg Product size 336mm×164mm×108mm Standard accessories Probe×2/4 (1×, 10× switchable), Power cord, USB cable Standard individual packing Carton box Standard quantity per carton 2pcs Standard carton measurement 450mm×420mm×280mm Standard carton gross weight 9.7kg SKU: n/a -
LED Tester
UT 659D LED Tester
Specifications Range UT659D Certifications CE/RoHS Output voltage 24V √ 300V √ Output current 2mA √ 30mA √ Continuity Output voltage: 5V (DC) Measuring resistance: 0~99.9Ω Input range 85V to 265V @ 50/60Hz Backlight function constant on Safety protection High-impedance open circuit Operating temperature 0°C~40°C Storage temperature -10°C~50°C Relative humidity <80% RH Operating altitude ≤2000m Drop protection 1m Category ratings CAT II 300V General Characterisitics Power AC 85V~260V， 50Hz/60Hz Display 60mm x 35mm Product net weight 175g Product size 150mm x 56mm x 42mm Standard accessories Power cable, test leads, English manual Standard individual packing Gift box, blister Standard quantity per carton 20pcs Standard carton measurement 345mm x 335mm x 245mm Standard carton gross weight 7.7kg SKU: n/a -
Optical Multimeter
UT 695D-10 Optical Multimeter
Specifications Model Description Optical power meter Wavelength range 800nm~1700nm Calibrated wavelength 850nm, 980nm, 1300nm, 1310nm, 1490nm, 1550nm, 1625nm, 1650nm Measurement range -70~3dBm Uncertainty ±5% Display resolution Linear: 0.1%, logarithmic: 0.01dBm Connector FC/SC/ST Detector type InGaAs Visual fault locator Wavelength 650nm±10nm Power 10mW (measurable optical fiber length: approximately 8~10km) Mode Continuous/Pulse Connector FC/SC/ST Flashlight √ LAN cable sequence test Line sequence measurement (LED1~8, LED_G) General Characteristics Power 1050mAh rechargeable battery Display 42mm x 33mm Product color Red and grey Product net weight 168g Product size 132mm x 68mm x 31mm Standard accessories USB cable Standard individual packing Gift box, English manual Standard quantity per carton 10pcs Standard carton measurement 305mm x 270mm x 130mm Standard carton gross weight About 2.7kg SKU: n/a
Related products
-
Multimeters
UT18C Voltage And Continuity Testers
UT18 series of test pen with measuring AC and DC voltage (including the three-phase alternating current) measurement, phase of three-phase AC power indicator, on-off test, RCD test, single pen measurement (can determine the zero line or wire), self checking, no battery detection and other functions.
Suitable for: smelting, electronics, manufacturing, defense, electric power, petroleum, chemical industry. Also used to solve complex problems of electronic, factory automation, power distribution and electrical equipment in.SKU: n/a -
Multimeters
UT61B Modern Digital Multimeters
UT61 Series Digital Multimeters are products designed for multi-functional, high precision, high performance and automatic measurements.
- 1、Large LCD screen；
- 2、High resolution analog pointer display；
- 3、Full range overload protection；
- 4、Data hold, REL, Peak value measurement；
- 5、Low battery indication, backlight, and sleep mode；
- 6、External interface supports RS-232C and USB cable.UT61Series can measure AC/DC voltage and current, resistance, diode, circuit continuity, capacitance, frequency, temperature, hFE, electromagnetic induction, etc.
UT61 Series complies with the standard IEC61010: CAT. III 1000V, CAT.IV 600V; they are widely used in Industrial Production and Service, Technological Research and Design, College Education (Laboratory, Courses), and Automotive Industry.
SKU: n/a
There are no reviews yet.