-29%

Battery Load Tester – BT 100D

Availability:

7 in stock
Add to Wishlist
Compare
  • 100 Amp Digital Battery Load Tester
  • Microprocessor Control–makes for an easy and accurate load test with no need to time yourself
  • Bright, LED Digital Display–indicates both voltage and test results
  • Unique 3-Step Design–LED polarity check function, battery load test and charging system test readout
  • Super-Grip Battery Clamps–heavy-duty and color-coded
  • Baked Enamel, Steel Case–ventilated to keep cool
  • Rubber Insulated Carrying Handle–for comfort and safety
  • Checks both Battery and Charging System

₨5,000 ₨7,000

7 in stock

Compare

The BT-100D 100+ Amp Digital Battery Load Tester is microprocessor controlled. It makes for an easy and accurate load test with no need to time yourself to get accurate results. Bright, LED Digital Display indicates both voltage and test results. A unique 3-Step Design provides LED polarity check function, battery load test and charging system test readout. Automatically Turns Off the Load after 10 seconds and locks the voltage. Super-Grip Battery Clamps are heavy-duty and color-coded. Baked Enamel, Steel Case to keep cool. Rubber Insulated Carrying Handle–for comfort and safety. Checks both Battery and Charging System.

Category: Tag:
Weight 0.7 kg
Dimensions 15 × 8 × 6 cm

12 Volt Battery Analysis

Press “START TEST” & wait for 10 seconds.
Once automatic test cycle is completed, your test results will be:

1. GREEN LIGHT = OK):
Battery capacity is good. May or may not be fully charged.
Determine state of charge by checking specific gravity (use hydrometer). If gravity is less than full charge, check for possible charging system trouble or electrical drain. Recharge battery to fully charged level.

2. GREEN + YELLOW LIGHT = OK BUT WEAK):
Review the load test result with the comparison chart on the tester cover to see if this battery is “OK” or not. If it is “OK”, go up to 1ST “OK” state. If it is not, go down to 3rd “WEAK” state.

3. YELLOW LIGHT = WEAK):
Battery capacity is unsatisfactory. Battery may be either: (1) defective or (2) partially discharged. To determine which, check specific gravity. If gravity is over 1.225, battery is considered defective. If gravity is under 1.225, recharge battery and re-test. If cell-to-cell gravity varies more than 0.025 (25 points), cell trouble may exist. If charging does not bring gravity to fully charged level, the battery is either sulfated or has lost active material.

4. RED LIGHT = BAD):
Battery may be defective (e.g. a bad cell).

NOTE: If pre-test battery voltage is below 12.3V, tester will not allow and should not perform the load test. Please fully charge battery and retest.

Brand

TITAN

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Battery Load Tester – BT 100D”

There are no reviews yet.

  • YIHUA 908D-II LED DIGITAL THERMOSTAT ELECTRONIC SOLDERING IRON

    YIHUA 908D-II LED DIGITAL THERMOSTAT ELECTRONIC SOLDERING IRON

    0 out of 5
    (0)

    1.Portable anti-static thermostat soldering iron, using latest advanced temperature control circuit for precise temperature control.

    2.Heating core uses high quality and durable materials, extending its service life.

    3.The handle uses completely new environmentally friendly and heat resistant materials.
    A high temperature spacer between the handle and the heating tube prevents heat
    transfer and ensures comfortable use.

    4.LED digital display, allowing users to directly monitor the temperature and making
    soldering work easier.

    5.It is equipped with a lock temperature switch. When it is opened to the lock temperature
    state, the temperature is not adjustable; when the switch is turned to the unlocked state,
    the temperature adjustment is resumed.

    6.The 908D is an upgraded version of the 908D, featuring the 908D, with digital temperature
    correction, 0/510/30 minute sleep, and Fahrenheit/Celsius display conversion.

    SKU: n/a
    ₨4,513 ₨6,581
    Read more
    Add to Wishlist
    Compare

  • UT353-BT Mini Sound Level Meter

    UT353-BT Mini Sound Level Meter

    0 out of 5
    (0)

    1. White backlight, clear LCD screen

    2. Adjustable sampling rate, fast/slow
    3. 1/2 inch condenser microphone
    4. Light weight, ergonomic design, user-friendly interface
    SKU: n/a
    ₨6,000 ₨6,500
    Add to cart
    Add to Wishlist
    Compare

  • JM 6092B TOOL KIT

    JM 6092B TOOL KIT

    0 out of 5
    (0)
    JM-6092B 58 in 1 Multi-functional Screwdriver Hand Tool Set Household also called 58-in-1 interchangeable precise manual tool set, jakemy jm 6092B, jakemy tools review, repair tools, Tool kit, Hand tools Set, jakemy precision screwdriver set, JM 6092B, jakemy screwdriver set 58 in 1 is a professional portable hardware tools; it is Light weight & has compact design. It contains High hardness and good toughness, PP&TPR material and non-slip handle. This set of tools is designed for repairing mobile phones (not for iPhone), hard drives and other electronic products. Brand: JAKEMY Model: JM-6092B Features: 1.This set of tools are designed for repair mobile phones, hard drives and other electronic     products. 1. 58-in-1 interchangeable precise manual tool set. 2. Professional portable hardware tools. 3. Light weight, compact design. 4. High hardness and good toughness. 5. PP&TPR material, non-slip handle. 6. By using this set of tools, you can remove the small part of your   cellphone/computer/Mp4…and repair the device without damaging it. 7. Size:19.8cm x 12.5cm x 4.5cm (box size)  8. Quantity:1pc   Specifications:   Material: PP & TPR & CR-V steel Hardness: H.R.C. 50-52 Package weight: 690g/1.50lb Package size: 20 x 12 x 4.5cm  Package includes:    32 x 6.3mm Diameter CR-V black precision bits  20 x 4mm Diameter CR-V white precision bits  1 x 120mm PP&TPR plastic precision handle  1 x 125mm PP&TPR plastic handle  1 x 125mm Aluminum extension rod  1 x 60mm Fine steel extension rod  2 x 115mm tweezers
    SKU: n/a
    Read more
    Add to Wishlist
    Compare

  • Flux Paste Mechanic MCN-UV10, (for lead-free soldering, halogen-free, 10 ml)

    Flux Paste Mechanic MCN-UV10, (for lead-free soldering, halogen-free, 10 ml)

    0 out of 5
    (0)
    SKU: n/a
    ₨650 ₨800
    Add to cart
    Add to Wishlist
    Compare

  • UT309D Professional IR Thermometer

    UT309D Professional IR Thermometer

    0 out of 5
    (0)

    1. EBTN screen, 20 sets of data storage (UT309D)

    SKU: n/a
    ₨13,080 ₨17,454
    Read more
    Add to Wishlist
    Compare

  • UT526 Multifunction Electrical Meter

    UT526 Multifunction Electrical Meter

    0 out of 5
    (0)
    SKU: n/a
    ₨45,600 ₨50,000
    Add to cart
    Add to Wishlist
    Compare

Related products

  • UT715 Multifunction Loop Process Calibrator

    UT715 Multifunction Loop Process Calibrator

    0 out of 5
    (0)

    Features of UT715 Multifunction Loop Process Calibrator

    Certifications: CE, UKCA

    ● Step/ramp functions

    ● Source and measure accuracy up to 0.02%
    ● Rechargeable battery
    ● Contrast adjustment
    ● Auto power off (Time adjustable)
    ● Stores and recalls setups
    ● USB communication
    ● Provides 24V loop power to transmitter while conducting mA current measurement at the same time
    SKU: n/a
    ₨158,268 ₨163,500
    Add to cart
    Add to Wishlist
    Compare

  • UNI-T UT3513 DC Resistance Tester Microohmmeter 4.3 Inch LCD Screen Cable/Coil/Motor Resistance Test

    UNI-T UT3513 DC Resistance Tester Microohmmeter 4.3 Inch LCD Screen Cable/Coil/Motor Resistance Test

    0 out of 5
    (0)
    Model UT3513
    Resistance range 20m Q/200m Q/2Q/20Q /200 Q/2kQ/20kQ
    Resolution 1 u Q/10 u Q/100 u Q/lmO/lOmQ/lOOmQ/1 Q/10Q/100Q
    Test current 1A/1A/100mA/10mA/1mA/1mA/100 uA/10 u A/l uA
    Testing terminal opencircuit voltage ＜1V/＜1V/＜1V/＜1V/＜5V/＜5V/＜5V/＜5V/＜3V/
    Measured parameter DC resistance
    Basic accuracy Slow: 0. 1%; Medium: 0. 2%
    Maximum reading 22000
    Range mode Auto/Manual/nominal
    Calibration Short-circuit full range zeroing
    Sorting function 3types of resistance and voltage input: exceeds upper limit/exceeds lower limit/within the range,2 types of sorting result output: PASS/FAIL
    Comparing method Absolute tolerance, percentage tolerance, direct-reading comparison
    Trigger mode Internal, external
    Test terminal Four-terminal measurement
    Button functions Lock 一一 keyboard lock, OK 一一 screenshot
    System setup Language: Chinese/English, key tone setting
    Interfaces & protocols Handler interface, RS232, USB DEVICE and USB HOST communication interface,SCPI and Modbus protocol
    Upper computer software V
    Power AC 100~240V 50/60Hz
    Display 4.3-inches LCD
    SKU: n/a
    ₨126,000 ₨136,795
    Add to cart
    Add to Wishlist
    Compare

  • UNI-T UTi320V Thermal Image

    UNI-T UTi320V Thermal Image

    0 out of 5
    (0)

    Technical Specifications of UTi320V Thermal Image:

    Specifications
    Model UTi320V
    Temperature range  -20~350℃
     -4℉~662℉
    Temperature accuracy ±2℃ or ±2% (whichever is greater)
    Temperature resolution 0.1℃/0.18℉
    Thermal resolution 320×240
    Temperature coefficient ± 0.1/℃ or ± 0.1%/℃ (whichever is greater)
    Visible light resolution 640×480
    Emissivity Adjustable (0.01-1.00), 0.98 in default
    Reflectivity Reflectivity correction (adjustable background temperature)
    Palettes White hot, iron red, arctic, rainbow 2, hot iron, rainbow 1
    High/low temperature tracking √
    High/low temperature alarm √
    Image blending/Picture in picture √
    WIFI mode Connects to PC software and moblie phone App
    Lens 7mm
    Focus Focus free
    FOV 42.5°×32.5°
    NETD ≤60mK
    Image frequency 50Hz
    Digital zoom ×2, ×4
    General Characteristics
    Power 7.4V 2300mAh Li-ion battery
    Display 3.5-inches TFT LCD
    Product color Red and grey
    Product net weight 1.8kg (Package)
    Product size 258mm x 98mm x 90mm
    Standard accessories Li-on battery x 2, USB power supply with multi plugs,
    wrist strap, adaptor×5, SD card, USB cable, PC software CD
    Standard individual packing Gift box, tool box, English manual
    Standard quantity per carton 1pcs
    Standard carton measurement 410mm x 265mm x 180mm
    Standard carton gross weight 2.2kg
    SKU: n/a
    ₨498,000 ₨501,400
    Add to cart
    Add to Wishlist
    Compare

  • UT675A Battery Testers

    UT675A Battery Testers

    0 out of 5
    (0)

    Features of UT675A Battery Testers

    Certifications: CE, UKCA, FCC

    ● 12V cranking lead acid battery test

    ● 12/24V charging or cranking system test
    ● Display battery capacity, voltage, resistance and life
    ● Four-termina Kelvin test
    ● 10 types of battery standards
    ● Language option (Chinese/English)
    ● Test without battery disassembly
    ● LED color indication for test result (UT673A)
    ● Print on-line and real-time test reports (UT675A)
    ● USB data transfer (UT675A)
    SKU: n/a
    ₨26,400 ₨27,250
    Add to cart
    Add to Wishlist
    Compare
Got Questions ? Call us 24/7! 03324478447
© Mart pakistan.com , best price in pakistan - All Rights Reserved
Got Questions ? Call us 24/7! 03324478447