-
×
YH 131B ELEMENT FOR YH 947V,928D-II,III
- Vendor:
superworld
Subtotal: ₨419
-7%
DC Power Supplies
YIHUA 605D DC Power Supply
YH-605D communication maintenance power supply
605D communication maintenance power supply is a single line output of stabilized high accuracy
DC stabilized power supply. The output voltage and current can be adjusted continuously within
the rated range. Double digital display shows output voltage and current independently. Several
protection functions include current limitation, voltage reduction, short circuit protection, over-
temperature protection, etc.
The design is applied to production line of the plant, maintenance, laboratories and is also
a necessary device for the communication industry.
₨22,000 ₨23,710
Principle description of constant voltage/constant current CV/CC
The operation mode of constant voltage/constant current can be automatically switched depending
on the comparison result of the load current and limited current value.
- a) Constant voltage CV
When the existing current value is smaller than the set output limit current value, the power supply
is working under the constant voltage mode. The CV indicator light on the front panel is on, the output
voltage is controlled and it will be the same as the set value. Current changes with the load.
- b) Constant current mode (CC)
When the current value exceeds the limit value of the output current, the equipment will work in the
CC mode. The CC indicator light on the front panel is on, the output current value is controlled to
the set value. Since the limited output power cannot be overloaded, the output voltage can be lower
than the set value. When the output current is lower than the set value, the equipment will
automatically change to CC mode.
| Weight | 5.9 kg |
|---|---|
| Dimensions | 25 × 13 × 15 cm |
Product parameters
| Machine parameters | |
| rated voltage | AC220V 50Hz |
| Power of complete machine | 380W |
| Operating environment | 0～40℃ relative humidity ＜80％ |
| Storage Temperature | －20～80℃ relative humidity ＜80％ |
| Dimensions | 255*130*150mm |
| weight | 6.1KG |
| Specifications | |
| output voltage | Adjustable continuously within 0～60V |
| output current | Adjustable continuously within 0～5A
(current limitation adjustment when above 0.2A) |
| output power | 300W |
| Source effect | 1mV |
| load effect | ≤0.33% |
| Ripple noise | ≤3mVrms（5Hz ~ 1MHz）/≤3mArms |
| Display accuracy | 0.1V/0.1A/1mA |
| Protection mode | Over-current, short circuit, over-temperature protection |
| Dissipation mode | air cooling |
Brand
YIHUA
Based on 0 reviews
Be the first to review “YIHUA 605D DC Power Supply”
-
Usb Tester
UNI T UT658DUAL USB Tester
Features of UT658 Series USB Testers
Certifications: CE, UKCA
● Type-A/C interface
● CE certification
● 10 sets of data storage
● Loop equivalent resistance measurement (1-480Ω)
● Same screen shows voltage, current, power, capacity, etc.
● Support fast charge protocol
SKU: n/a -
Environment Meters
A25F PM2.5 Meter
1. Precise PM2.5 concentration based on pre-calibrated sensors
2. Temperature measurement (°C/°F)3. Humidity measurement4. Emoticon display5. LCD backlight and red backlight alarm6. Battery status, low power, auto power off7. Formaldehyde concentrationSKU: n/a -
Digital Multi Meter
UT372D 2-in-1 Tachometer
UT372D 2-in-1 Tachometer is a reliable and safe tachometer, which combines contact and non-contact measurement modes. It is mainly used to measure Revolutions Per Minute(RPM) , frequency, surface velocity and length in the fields of motors, fans, automobiles, papermaking, etc.
SKU: n/a
Related products
-
DC Power Supplies
YH 1502D+ DC POWER SUPPLY
Parameters
Rated voltage AC220V±10% 50Hz Operating environment 0～40℃ relative humidity＜80％ Storage temperature －20～80℃ relative humidity＜80％ Dimensions of the machine body 27*14*22cm Weight 1.9KG Performance parameters Output voltage Adjustable continuously within 0～15V Output current Adjustable continuously within 0～2A (current limitation adjustment when above 0.2A) Output power 15W Source effect ≤1mV Load effect ≤0.33% Ripple noise ≤3mVrms（5Hz ~ 1MHz）/≤3mArms Display accuracy 0.1V/0.1A/1mA Protection mode Over-current, short circuit, over-temperature protection Dissipation mode Air cooling SKU: n/a -
DC Power Supplies
YH 1502DD DC POWER SUPPLY
Parameters
Rated voltage AC220V±10% 50Hz Power of complete machine 15W Operating environment 0～40℃ relative humidity＜80％ Storage temperature －20～80℃ relative humidity＜80％ Dimensions of the machine body 17*21*16.5cm Weight 1.61KG Performance parameters Output voltage Adjustable continuously within 0～15V Output current Adjustable continuously within 0～1A (current limitation adjustment when above 0.2A) Output power 15W Source effect ≤1mV Load effect ≤0.33% Ripple noise ≤3mVrms（5Hz ~ 1MHz）/≤3mArms Display accuracy 0.1V/0.1A/1mA Protection mode Over-current, short circuit, over-temperature protection SKU: n/a -
DC Power Supplies
UTP1305 DC Power Supply
Specifications Model UTP1305 Output voltage 0~32V Output current 0~5A Load regulation CV≤1×10-4 +3mV, CC≤2×10-4 +3mA Ripple and noise ≤1mVrms Output regulation resolution CV: 100mV (typical), CC: 10mA (typical) Reliability MTBF(e): ≥2000hrs Display mode LED voltage and current dual display Feature Auto conversion of constant voltage and current with current limit protection General Characteristics Power Input voltage: 115V AC/230V AC;
frequency: 47Hz~63HzProduct color White and grey Product net weight 5kg Product size 145mm x 175mm x 284mm Standard accessories Power cord, output cables Standard individual packing Carton box Standard quantity per carton 2pcs Standard carton measurement 430mm x 400mm x 255mm Standard carton gross weight 13kg SKU: n/a
There are no reviews yet.