-8%

UT18D Voltage and Continuity Tester

Availability:

10 in stock


1. Auto power off, the conductor to be measured is greater than 12V

2. Phase rotation test
3. Continuity test with buzzer and LED indication
4. Low battery indication and over voltage prompt
5. Flashlight
6. Test live voltage without batteries
7. Buzzer and silent modes available
8. Auto range
9. Polarity indication

12,000 13,000

10 in stock

Compare
UT18 series are designed for testing AC/DC voltage, 3-phase voltage, phase sequence, continuity, and more. This series is categorized as CAT IV 600V and meets IP65 standard. These voltage testers are perfect tools for electricians to quickly measure voltage levels in all environments. This series should NOT be used with 110V electrical systems.
Weight 0.3 kg
Dimensions 27 × 8 × 3 cm

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UT18D Voltage and Continuity Tester”

There are no reviews yet.

  • UPO 2104E Ultra Phosphor Oscilloscope

    0 out of 5
    (0)
    Specifications
    Model UPO2104E
    Bandwidth 100MHz
    Channels 4
    Sampling rate 1GS/s
    Memory depth 56Mpts (single channel)
    Waveform capture rate 83,000wfms/s
    Time base scale (s/div) 5ns/div~50s/div
    Input impedance (1MΩ±2%) II (20pF±3pF)
    Vertical scale (V/div) 1mV/div~20V/div (1MΩ)
    Waveform record 65,000 Frames
    Trigger types Edge, pulse width, runt, window, N-edge, delay, timeout, duration, setup/hold, slope, video, code
    Waveform operations A+B, A-B, A×B, A/B, FFT, logic operation, advanced
    Auto measurements  Peak-Peak, Amplitude, Maximum, Minimum, Top, Bottom, Mean, Middle, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, Overshoot, Pre shoot, Frequency, Cycle, Rise Time, Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio, Delay A->B (Rising edge), Delay A->B (Falling edge), Delay B->A  (Rising edge), Delay B->A (Falling edge).
    Number of measurements Display 5 measurements at the same time
    Measurement statistics Average, Max, Min, Standard Deviation, Number of Measurements
    Frequency counter Hardware 6 bits counter (Channels are selectable)
    Standard interfaces USB-Host, USB-Device, LAN, AUX (Trig Out, Pass/Fail)
    General Characteristics
    Power 100V~240VAC, 50Hz/60Hz
    Display 8 inches TFT color LCD Display with WVGA (800×480) resolution
    Product color White and grey
    Product net weight 3.5kg
    Product size 336mm×164mm×108mm
    Standard accessories Probe×2/4 (1×, 10× switchable), Power cord, USB cable
    Standard individual packing Carton box
    Standard quantity per carton 2pcs
    Standard carton measurement 450mm×420mm×280mm
    Standard carton gross weight 9.7kg
    SKU: n/a
  • LM 1000 Laser Range Finder

    0 out of 5
    (0)
    SKU: n/a
  • UT A61 Food Temperature Meter

    0 out of 5
    (0)
    Specifications A61
    Measurement range -40℃~250℃ (-40℉~482℉)
    Accuracy ±1℃ (-20℃≤T<100℃)
    ±2℃ (T<-20℃; T≥100℃)
    ±2℉ (-4℉≤T<212℉)
    ±4℉ (T<-4℉; T≥212℉)
    Minimum measuring depth 12mm
    Sensor NTC
    Stabilization time 20s
    Resolution 0.1℃ (0.1℉)
    Power 3V button cell×1 (CR1632)
    Battery duration 12h
    Operating temperature 0℃~40℃ (32℉~104℉)
    Storage temperature -20℃~60℃ (-4℉~140℉)
    Operating humidity <RH80% (No condensable)
    General Characterisitics
    Power 3V battery (CR1632)
    Display 26.6mm x 10.6mm
    Product color White and grey
    Product net weight 50.8g
    Product size 190mm x 29.5mm x 15.5mm
    Standard accessories Battery
    Standard individual packing Blister, English manual
    Standard quantity per carton 40pcs
    Standard carton measurement 520mm x 210mm x 280mm
    Standard carton gross weight 5kg
    SKU: n/a
  • UTS 3030D SPECTRUM ANALYZER

    0 out of 5
    (0)

    UTS 3000 series high sensitivity spectrum analyzer are equipped with full aluminum case. Users can select many application, such as remote control, integrated system and education presentation with USB/LAN/VGA/GPIB/RS232 interface and standard SCPI instructions. Frequency AM/FM demodulation, adjacent channel power and chromatogram are measuring parameters.

    SKU: n/a
  • UT L28 Meter Lead

    0 out of 5
    (0)
    • Suitable for digital multimeter testing, convenient to use.
    • Used to test current,voltage,resistance,capacitance,frequency,etc.
    • Test pen tip with rubber shrouded protection, prevent wear and lasting use.
    • High quality, it’s a good tool and brings a lot of conveniences.
    • Double insulated wire.
    • Removable tip shield sleeve.
    • Banana plug input terminal, general type probes.● Leads length: 900mm, Rod length: 128mm
      ● Tip length: 16.8mm
      ● Safety level: CAT III 1000V/CAT IV 600V 10A
      ● Safety certificate: EN 61010-031 A1:2015
      ● Features and application: Double insulated wire, removable
    SKU: n/a
  • UTP 03 60MHZ PROBE

    0 out of 5
    (0)

    Attenuation ratio: 1× and 10× optional.

    Portable design according to ergonomics.

    Integral injection moulding makes the usage more flexible and the oscillograph able to adapt more testing situations.

    Safety standards: it has passed the CE Attestation of the European Community.

    Compatible with domestic and international digital and analogue oscilloscopes in relevant frequency.

    Measurement in intermediate and low-frequency signals.

    Accessories included by PP series passive voltage rapier.

    Adjusting tool: adjusts compensation capacitance to assure the rapier match with oscillograph.

    Contractive-type acuminate hook.

    12cm earth wire with an alligator clip.

    Locating sleeve adapts to IC testing.

    Double-nip wire.

    SKU: n/a